dual mapping

мат. двойственное преобразование

- almost open mapping - almost proper mapping - almost separably-valued mapping - completely regular mapping - correlative mapping - countably biquotient mapping - countably multiple mapping - homotopically regular mapping - homotopically stable mapping - homotopy inverse mapping - locally homeomorphic mapping - locally homomorphic mapping - locally infinitesimal stable mapping

мат. dual mapping

mode, condition, regime,

function, operation, rating, setting
- (вид работы аппаратуры, системы) — mode
- (заданные условия работы двигателя при определенном положении рычага управнения двигателем) — power setting. in changing the power setting, the power-control lever must be moved in the manner prescribed.
- (мощность или тяга двигателя в сочетании с определениями как взлетный, крейсерский максимально-продолжитепьный) — power, thrust. takeoff power /thrust/. maximum continuous power /thrust/
- (номинальный, паспортный, расчетный) — rating
работа в заданном пределе рабочих характеристик в определенных условиях. — rating is а designated limit of operating characteristics based оп definite conditions.
- (номинальная мощность или тяга двигателя, приведенная к стандартным атмосферным условиям) — power rating. power ratings are based upon standard atmospheric conditions.
- (при нанесении покрытия) — condition
- (работы агрегата по производительности) — rating. pump may be operated at low or high ratings.
- (тяги двигателя при апрелеленном положении руд) — thrust. run the engine at the takeoff thrust.
- (частота действий) — rate
- автоматического захода на посадку — automatic approach (eondition)
- автоматического обмена данными с взаимодействующими системами (напр., ins, tacan) — (mode of) transmission and/or reception of specifled data between systems in installations such as dual ons, ins, tacan, etc.
- автоматического управления полетом — automatic flight condition
- автоматической выставки (инерциальной системы) — self-alignment mode
- автоматической работы двигателя. — engine governed speed condition

at any steady running condition below governed speed.
- автоматической (бортовой) системы управления (абсу, сау) — afcs (automatic flight control system) mode
- автомодуляции — self-modulation condition
-, автономный (системы) — autonomus /independent/ mode
-, автономный (системы сау) — independent control mode
- авторотации (вертолета) — autorotation, autorotative condition
заход на посадку производится с выключенным двигателем на режиме авторотации несущего винта. — the approach and landing made with power off and entered from steady autorotation.
- авторотации (воздушного винта, ротора гтд, вращающегося под воздействием набегающего воздушного потока) — windmilling. propeller ог engine rotor(s) freely rotating because of а wind or airstream passing over the blades.
-, астроинерциальный — stellar inertial mode
- астрокоррекции — stellar monitoring mode
-, бесфорсажный (без включения форсажной камеры) — cold power /thrust/, попafterburning power /thrust/
-, бесфорсажный (без впрыска воды или воднометаноловой смеси на вход двигателя) — dry power, dry thrust
- бов (блока опасной высоты) — alert altitude (select) mode
-, боевой (работы двигателя) — combat /military/ rating, combat /military/ power setting
- бокового управления (системы сту) — lateral mode. the lateral modes of fd system are: heading, vor/loc, and approach.
- большой тяги (двиг.) — high power setting
- буферного подзаряда аккумулятора — battery trickle charge (condition)
- быстрого согласования (гиpoагрегата) — fast slave mode
- ввода данных — data entry mode
- вертикальной скорости (автопилота) — vertical speed (vs) mode
-, вертикальный (системы сду или сту) — vertical mode. the basic vertical modes are mach, ias, vs. altitude, pitch
-, взлетный (двигателя) — takeoff power
-, взлетный (тяга двиг.) — takeoff thrust
-, взлетный (полета) — takeoff condition
- висения (вертолета) — hovering
- "вк" (работы базовой системы курса и вертикали (бскв) при коррекции от цвм) — cmptr mode
-, внешний (работы сау) — coupled /interface/ control mode
-, возможный в эксплуатации) — condition (reasonably) expected in operation
- вор-илс (работы директорией системы) — vor-loc mode, v/l mode
- воспроизведения (магн. записи) — playback mode
- выдерживания (высоты, скорости) — (altitude, speed) hold mode
- выдерживания заданного курса — hog hold mode
- "выставка" (инерциальной системы) — alignment /align/ mode
в режиме "выставка" система автоматически согласуется e заданными навигационными координатами и производится выставка гироскопических приборов, — in align mode system automatically aligned with reference to navigation coordinates and inertial instruments are automatically calibrated.
- выставки, автоматический (инерциальной навигационной системы) — self-alignment mode. the align status can be observed any time the system is in self-alignment mode.
- вычисления параметров ветpa — wind calculator mode. wind calculator mode is based on manually entered values of tas
- вызова (навигационных параметров на индикаторы) — call mode
- вызова на индикаторы навигационных параметров без нарушения нормального самолетовождения (сист. омега) — remote mode. position "r" enables transmission and/or reception of specified data between systems in installations such as dual ons, ins/ons, etc.
-, генераторный (стартер-генератора) — generator mode
стартер-генератор может работать в генераторном или стартерном режиме, — starter-generator can operate in generator mode or in motor mode (motorizing functi on).
-, гиперболический (работы системы омега) — hyperbolic mode. in the primary hyperbolic mode the position supplied at initialization needs only to be accurate to within 4 nm.
- гиромагнитного (индукционного) компаса (гmk) — gyro-flux gate (compass) mode
- гиромагнитной коррекции (гмк) — magnetic slaved mode (mag)
- гmк (гиромагнитного компаca) — gyro-flux gate (compass) mode
- горизонтального полета — level flight condition
- горячего резерва (рлс) — standby (stby) mode
- гпк (гирополукомпаса) — dg (directional gyro) mode, free gyro mode of operation
- "да-нет" (работы, напр., сигнальной лампы) — "yes-no" operation mode
-, дальномерный (дме) — dме mode
-, дальномерный (счисления пути) (системы омега) — dead reckoning mode, dr mode of operation, relative mode
- двигателя (no мощности или тяге) — engine power /thrust/, power /thrust/ setting
- (работы двигателя) для захода на посадку — approach power setting
-, дежурный (работы оборудования) — standby rate (stby rate)
- завышенных оборотов — overspeed condition
- заниженных оборотов — underspeed condition
- заданного курса (зк) — heading mode
режим работы пилотажного командного прибора (пкп) дпя выхода на и выдерживания зк. — in the heading mode, the command bars in the flight director indicator display bank (roll) commands to turn the aircraft to and maintain this selected heading.
- заданного путевого угла (зпу) — course mode
- захвата луча глиссадного (курсового) радиомаяка — glideslope (or localizer) cарture mode
- "земля-контур" (рлс) — contour-mapping mode
- земного малого газа — ground idle power (setting)

with engines operating at ground idle (power).
- и/или тяга, максимальный продолжительный — maximum continuous power and/or thrust
-, импульсный (сигн. ламп) — light flashing
"откл. имп. режима" (надпись) — lt flash cutout
- инерциально-доплеровский (ид) — inertial-doppler mode
-, инерциальный (работы навигационной системы) — inertial mode
-, командный (автопилота) — (autopilot) command position

both autopilots in command position.
-, компасный — compass mode
в компасном режиме магнитная коррекция курса обеспечивается датчиком ид. — when compass mode is selected, magnetic monitoring is applied from detector unit.
-, компасный (apk) (автоматического радиокомпаса) — adf compass mode. the adf function switch is set to "comp" position, (to operate in the compass mode).
- "контроль" (инерц. системы) — test mode
обеспечивает автономную проверку системы без подкпючения контр.-повер. аппаратуры. — provides the system selftesting
- (-) "контур" -(работы рлс) — contour (mode) (cntr)
- коррекции (координат места) — up-dating mode
-, крейсерский (двиг.) — cruising /cruise/ power
-, крейсерский (на з-х двигатолях) (полета) — 3-engine cruise
-, крейсерский (полета) — cruising (condition)
-, крейсерский (с поэтапным увеличением оборотов при испытании двигателя) — incremental cruise power (or thrust)
-, крейсерский, номинальный (полета) — normal cruise (nc)
-, крейсерский рекомендуемый (максимальный) — (maximum) recommended cruising power
- крейсерского полета (для скоростной или максимальной дальности) — cruise method
-, критический (работы системы, двигателя) — critical condition
- критический, по углу атаки — stalling condition
- "курсовертикаль" ("kb") — attitude (атт) mode
в данном режиме от системы не требуется получение навигационных параметров. выдаются только сигналы крена (у) и тангажа (у). — in this mode ins alignment and navigation data, except attitude, are lost.
-, курса-воздушный — air data-monitored heading hoid mode
-, курсовой (при посадке по системе сп или илс) — localizer mode
- курсозадатчика (курсовой системы гмк или гик) — flux gate slaving mode. the mode when the directional gyro is slaved to the flux gate detector.
-, курсо-доплеровский — doppler-monitored heading hold mode
- магнитной коррекции (мк) — magnetic(ally) slaved mode (mag)
- максимальной (наибольшей) дальности — long range cruise (lrc). lrc is based on a speed giving 99 % of max, range in no wind and 100 % max. range in about 100 kt headwind.
- максимальной продолжительности (полета) — high-endurance cruise
-, максимальный крейсерский (mkp) (выполняется на предельной скорости) — high speed cruise (method)
-, максимальный продолжительный (мпр) (двиг.) — maximum continuous power (мcp)
-, максимальный продолжительный (по тяге) — maximum continuous thrust (мст)

increase thrust to мст.
- малого газа — idling power (setting)
попеременная работа двигателя на номинальной мощности и режиме малого газа или тяги, — one hour of alternate fiveminute periods at rated takeoff power and thrust аnd at idling power and thrust.
- малого газа на земле — ground idling power /conditions/
- малого газа при заходе на посадку — approach idling power /conditions/
- малой тяги (двиг.) — low power setting
- (-) "метео" (работы рлс) — weather (mode)
- "метео-контур" (рлс) режим — contour-weather mode
- (5-ти) минутной мощности (двиг.) — (five-) minute power
- "мк" (магнитной коррекции) — mag
- мощности, максимальный продолжительный (двиг.) — maximum continuous power
- мощности, чрезвычайный — emergency power
- набора высоты — climb condition
- "навигация" (инерциальной системы) — navigation (nav) mode
при заданном режиме система обеспечивает вычисление навигационных и директорных параметров и выдает информацию на пилотажные приборы и сау. — in this mode system computes navigation and steering data. provides attitude information to flight instruments and fcs.
- наибольшей (макеимальной) дальности — long range cruise (lrc)
горизонтальный полет на скорости наибольшей дальности, на которой километровый расход топлива при полете на заданной высоте наименьший. — а level flight at а given altitude and best range cruise speed giving the minimum kilometric fuel consumption.
- наибольшей продолжительности (полета) — high-endurance cruise
горизонтальный полет на скорости наибольшей продолжнтельности, на которой часовой расход топлива при полете на заданной высоте наименьший. — а level flight at а given altitude and high-endurance cruise speed giving the minimum fuel flow rate (in kg/h or liter/h)
- начала автоматической работы (нар режим начала автоматического регулирования работы гтд) — engine governed run/operation/ onset mode
- нвк (начальной выставки — initial heading alignment
-, непрерывной (обработки данных) — burst mods (data processing)
-, нерасчетный — off-design rating
-, неуетановившийся — unsteady condition
- (0.65) номинала, на бедной смеси — (65%) power, lean mixture setting
-, номинальный (двиг.) — (power) rating, rated power
-, номинальный (mпp) — maximum continuous power
- нормального обогрева (эп.) — normal-power heat (condition)
-, нормальный (работы агрегата) — normal rating
-, номинальный крейсерский (полета) — normal cruise (nc). used on regular legs and based on m = 0.85.
- обзора земной поверхности (рлс) — ground-mapping (map) mode
- обнаружения грозовых образеваний — thunderstorm detection mode (wx)
- "обогрев" (инерц. системы) — standby mode
режим предназначен для создания необходимых температурных условий работы элементов инерциальной системы (гироскопов, блоков автоматики и электроники). — the standby mode is а heating mode during which fast warm-up power is applied to the navigation unit until it reaches operating temperature.
- обогрева — heating mode
- обогрева лобовых стекол "слабо", "сильно" — windshield "warm up", "full power" heating rating
-, одночасовой максимальный (двиг.) — maximum one-hour power
- ожидания ввода координат исходного места самолета — initial position entry hold mode
- ожидания посадки — holding
-, оптимальный экономический (двиг.) — best economy cruising power
- освещения меньше-больше (яркость) — dim-brt light modes check lights in dim and brt modes.
-, основной навигационный (сист. "омега") — primary navigation mode
- отключенного шага (программы) — step off mode
- отсутствия сигналов ивс (системы омега) — no tas mode
- оценки дрейфа гироскопа — gyro drift evaluation mode
- перемотки (маги, ленты) — (tape) (re)wind mode
- пересиливания автопилота — autopilot overpower operation /mode/
-, переходный — transient condition
- планирования — gliding condition
- повышенных оборотов — overspeed condition
- полета — flight condition /regime/
состояние движения ла, при котором параметры, характеризующие это движение (например, скорость, высота) остаются неизменными в течение определенного времени. — it must be possible to make а smooth transition from one flight condition to any other without exceptional piloting skill, alertness, or strength.
- полета, критический — critical flight (operating) condition
- полета на курсовой маяк (при посадке) — localizer (loc) mode. flying in loc (or vor) mode.
- полета на станцию вор — vor mode
- полета, неустановившийся — unsteady flight condition
- полета по маяку вор — vor mode
- полета по системе илс — ils mode
- полета по условным меридианам — grid mode
данный режим применяется в районах, не обеспечивающих надежность компасной информации. — the grid mode can be used in areas where compass information is unreliable.
- полета, установившийся — steady flight condition
- полетного малого газа — flight idle (power)
-, полетный (двиг.) — flight power
-, пониженный (ниже номинала) (двиг.) — derating
- пониженных оборотов — underspeed condition
при возникновении режима пониженных оборотов рогулятор оборотов вызывает дополнительное открытие дроссельного крана. — for underspeed condition, the governor will cause the larger throttle opening.
-, поперечный (системы сду или сту) — lateral mode. the basic lateral modes are heading, vor/loc and approach.
-, посадочный (полета) — landing condition
- правой (левой) коррекции (оборотов двигателя вертолета) — engine operation with throttle control twist grip turned clockwise (counterclockwise)
-, практически различаемый — practically separable operating condition
к практически различаемым режимам полета относятся: взлетный, крейсерский (mapшрутный) и посадочный, — practically separable operating condition, such as takeoff, en route operation and landing.
- (работы двигателя), приведенный к стандартной атмосфере — power rating based upon standard atmospheric conditions
- приведения к горизонту — levelling
- продления глиссады — glideslope extension mode

the annunciator indicates when glideslope extension (ext) mode provides command signals to the steering computer.
- продольного управления (системы сту) — vertical mode. the vertical modes of fd system are: mach, ias, vs. altitude, pitch.
- просмотра воздушного пространства (переднего) — airspace observation mode (ahead of aircraft)
- просмотра воздушного пространства на метеообстановку (рлс) — radar weather observation mode
- просмотра земной поверхности (рлс) — ground mapping operation. the antenna is tilted downward to receive ground return signals.
- прямолинейного горизонтального полета — straight and level flight condition
- (частота) пусков ракет — (rocket firing) rate
- "работа" (положение рычага останова двигателя) — run
- "работа" (инерциальной навигационной системы) — navigate mode, nav mode. system automatically changes from alignment to navigate mode.
- работы — condition of operation

test unit in particular condition of operation.
- работы (агрегата, напр., наcoca) — rating
- работы (агрегата по продолжительности) — duty (cycle)
режим работы может быть продопжитепьным или повторно-кратковременным. — the duty cycle may be continuous or intermittent.
- работы (инерциальной системы) — mode of operation, operation mode
- работы, автоматический (двиг.) — governed speed /power/ setting
- работы автоматической системы управления (абсу, сау) — autoflight control system (afcs) mode
- работы автопилота — autopilot mode
- работы автопилота в условиях турбулентности — autopilot turbulence (turb) mode
при работе в условиях турбулентности включается демпфер рыскания для обеспечения надежной управляемости и снижения нагрузок на конструкцию ла. — use of the yaw damper with the autopilot "turb" mode will aid in maintaining stable control and in reducing structural loads.
- работы автопилота при входе в турбулентные слои атмосферы — autopilot turbulence penetration mode
данный режим применяется при полете в условиях сильной турбулентности воздуха, — use of the autopilot turbulence penetration mode is recommended for autopilot operation in severe turbulence.
- работы автопилота с директорной системой, совмещенный — ap/fd coupled mode
- работы двигателя (по мощности) — engine power (setting)
- работы двигателя (по тяге) — engine thrust (setting)
- работы двигателя (по положению руд) — engine power setting
- работы двигателя в особых условиях, (повышенный) — emergency (condition) power
- работы двигателя на земле — engine ground operation
- работы двигателя на малых оборотах — engine low speed operation
- работы двигателя, номинальный — engine rating. ths jt9d-з-за engines operate at jt9d-3 engine ratings.
- работы (двигателя), приведенный к стандартной атмосфере — power rating /setting/ based upon standard atmospheric conditions
- работы источника света, установившийся — light source operation at steady value
- работы, кратковременный — momentary operating condition
- работы no времени (агрегата) — time rating
- работы, повторно-кратковременный (агрегата) — intermittent duty
пусковая катушка работает в повторно-кратковременном режиме. — booster coil duty is intermittent.
- работы (системы), полетный — (system) flight operation
при выпуске передней опоры шасси система переключается на полетный режим, — when the nose lg is eхtended, the function of the system is transferred to flight operation.
- работы no сигналам станции омега — omega mode operation
- работы, продолжительный (агрегата) — continuous duty
генератор двигателя работает в продолжительном режиме, — the engine-driven generator duty is continuous.
- работы противообледенительной системы, нормальный — normal anti-icing
- работы противообледенительной системы, форсированный — high anti-icing
- работы самолетного ответчика (а - на внутренних линиях, в - на международных) — transponder mode (а - domestic, в - international)
- работы системы траекторного управления (сту), боковой — lateral mode
- работы сту, продольный — vertical mode
- рабочий (работы автопилота) — (autopilot) active position both autopilots in command positions, one active and one standby.
- рабочий (работы оборудования) — normal rate (norm rate)
- равновесной частоты (вращения) (двиг.) — on-speed condition
- равновесных оборотов — оп-speed condition
работа регулятора оборотов в режиме равновесных оборотов. — the constant speed governor operation under on-speed condition.
-, радиотелеграфный, тлг (автоматич. радиокомпаса) — c-w operation
-, радиотелеграфный (связи) — c-w communication, radio telegraphic communication
-, радиотелефонный, тлф (apk) — rt (radio telephone), voice operation (v), voice
-, радиотелефонный (связи) — voice communication, radio telephone communication
переключить передатчик на радиотелефонную связь, — set the transmitter for voice communication.
-, рамочный (арк) — loop mode
- распознавания светила — star identification mode
-, располагаемый максимальный продолжительный (двиг.) — available maximum continuous power
-, расчетный — rating
-, расчетный (условия работы) — design condition
- регулирования избыточного давления (системы скв) — differential pressure control (mode)
-, резервный (аварийный) (дв.) — emergency power rating
работа двигателя при гидромеханическом управлении оборотами и температурой при отказе электронной системы управления.
-, резервный (работы автопилота) — (autopilot) standby position
- самовращения (несущего винта) — autorotation, autorotative condition
- самоориентирования (переднего колеса шасси) — castoring
- скоростной дальности — high-speed cruise method
- "слабо", "сильно" (обогрева лобовых стекол) — (windshield heat) warm up, full power
- слабого обогрева (эл.) — warm-up heat (condition)
-, следящий (закрылков) — (flap) follow-up operation (mode)

when the flaps are raised, the flap follow-up system operates the slat control valve.
-, смешанный (работы спойлеров) — drag/aileron mode. а drag/aileron mode is used during descent both for retardation and lateral control.
- снижения — descent condition
-, совмещенного управления — override control mode
оперативное вмешательство в работу включенной системы.
-, совмещенный (при работе с др. системой) — coupled mode
-, совмещенной (работы автопилота) — autopilot override operation /mode/
в этом режиме отключаются рм и корректор высоты и летчик оперативно вмешивается в управление ла посредством штурвала и педалей. — то manually or otherwise deliberately overrule autopilot system and thereby render it ineffective.
-, совмещенный — both mode
(работы рлс в режимах обзора метеообразований и земной поверхности и индицирования маяков) — for operation in rad and bcn modes.
- согласования (автопилота) — synchronization mode
- согласования (работы следящей системы) — slave /synchronization/ mode
- стабилизации (крена, тайгажа, направления, автопилота) — roll (pitch, yaw) stabilization mode
- стабилизации (работы сту) — hold mode

the vertical and lateral modes are hold modes.
- стабилизации крена (в сту) — roll /bank/ (attitude) hold mode
- стабилизации курса (aп) — heading hold mode
- стабилизации тангажа (в сту) — pitch (attitude) hold mode
-, стартерный (всу) — engine start mode

apu may run in the engine start mode or as apu.
-, стартерный (стартер-гоноратора) — motor(izing) mode, (with) starter-generator operating as starter
- стопорения (работы следящей системы) — lock-out mode
- "сход(на) нзад" — return-to-selected altitude (mode)
- счисления пути (или дальномерный) (системы омега) — dead reckoning mode, dr mode of operation, relative mode
-, температурный — temperature condition
- тлг (работы арк) — c-w operation
- тлф (арк) — rt (radio telephone), voice
-, тормозной (работы спойле — drag /retardation/ mode
- управления — control mode
- управления в вертикальной плоскости (ап) — vertical mode
- управления в горизонтальной плоскости (инерциальной системы) — lateral control mode
управление по курсу, на маяки вор и крм. — the basic lateral modes are heading, vor/loc and approach.
- управления, позиционный (no командно-пилотажному прибору) — flight director control mode
- управления по крену (aп) — roll (control) mode
- управления, поперечный (автопилота) — lateral mode
- управления по тангажу (ап) — pitch (control) mode
- управления, продольный (автопилота) — vertical mode. vertical command control provides either vertical speed or pitch command.
- управления, штурвальный — manual (flight) control
-, усиленный (дополнительный, форсированный) (двиг.) — augmented power (rating)
при данном режиме увеличиваются температура газов на входе в турбину, обороты ротора или мощность на валу. — engine augmented takeoff power rating involves increase in turbine inlet temperature, rotor speed, or shaft power.
-, установленный (для данных условий испытаний двигателя) — rated power. а 30-hour run consisting of alternate periods of 5 minutes at rated takeoff power.
-, форсажный (с включенной форсажной камерой) — reheat /afterburning/ power /thrust/
-, форсажный (по тяге двиг.) — reheat thrust
-, форсажный (с впрыском воды или водометаноловой смеси на вход двигателя) — wet power, wet thrust
-, форсажный, полный (двиг.) — full reheat power /thrust/
- форсированного обогрева — full-power heat (conditions)
-, форсированный (работы агрегата) — high rating
-, форсированный (усиленный) (двиг.) — augmented power /thrust/
-, форсированный взлетный — augmented takeoff power
- холостого хода (двигателя вертолета с отключенной трансмиссией) — idle run power (with rotor drive system declutched)
- холостого хода (генератора, всу, электродвигателя) — по-load operation
-, чрезвычайный (работы двигателя в особых условиях) — emergency (condition) power
-, чрезвычайный (по тяге двигателя) — emergency thrust
-, чрезвычайный, боевой (двиг.) — combat /war/ emergency power
-, штурвальный (управления ла) — manual control mode
-, экономичный крейсерский — (best) economy cruising power
-, эксплуатационный (работы, агрегата, двигателя, самолета) — operational /operating/ condition
-, эксплуатационный (двиг.) — operational power rating
эксплуатационные режимы включают: взлетный, максимальный продолжительный (крейсерский), — operational power ratings cover takeoff, maximum continuous (and cruising) power ratings.
-, эксплуатационный полетный (двиг.) — flight power (rating)
двигатель должен нормально работать на всех эксплуатационных (полетных) режимах, — the engine must be capable of operation throughout the flight power range.
-, электромоторный (стартер генератора) — motor(izing) mode
-, элеронный (работы спойлеров) — aileron mode, lateral control augmentation mode
в p. (работы оборудования) — in mode

presently flying in heading (h) mode on a 030° heading.
в p. самоориентирования (о переднем колесе шасси) — in castor, when castoring
в пределах эксплуатационных р. — within (approved) operating limitations
выход на р. малого газа (двиг.) — engine (power) setting at idle, engine idle power setting
изменение p. работы двигатепя — change in engine power (or thrust)
метод установки (получения) (заданного p. работы двигателя) — methods for setting (engine) thrust /power/
на (взлетном) р. (двиг.) — at (takeoff) power

with the engine operating at takeoff power.
на (взлетном) р. (полета) — under (takeoff) condition
на максимальном продолжительном p. — at maximum continuous power
обороты (двигателя) на взлетном р. — takeoff (rotational) speed engine run at takeoff power with takeoff speed.
обороты (двигателя) на максимальном продолжительном p. — maximum continuous speed engine run at rated maximum continuous power with maximum continuous speed.
переключение p. (работы оборудования) — mode selection
переход (вертолета) от нормального р. к р. висения — reconversion
полет на крейсерском р. — cruise flight
полет на р. висения — hovering flight
при работе двигателя на взлетном р. — with engine at takeoff power, with takeoff power on (each) engine
при работе каждого двигателя на р., не превышающем взлетный — with not more than takeoff power on each engine
при установившемся р. работы с полной нагрузкой — at steady full-load condition
(75)% максимального продолжительного (или номинального) р. — (75) percent maximum continuous power (thrust)
работа на (взлетном) р. (двиг.) — (takeoff) power operation, operation at takeoff power
установка p. работы (двиг.) — power setting
этап p. (при испытаниях двигателя) — period. during the third and sixth takeoff power periods.
включать р. (работы аппаратуры системы) — select mode
включать р. продольного (поперечного) управления (aп, сду) — select vertical (lateral) mode
включить систему в режим (напр., "выставка") — switch the system to (align mode, switch the system to operate in (align mode)
выдерживать (взлетный) р. (двиг.) — maintain (takeoff) power
выходить на (взлетный) р. (двиг.) — come to /attain, gain/ (takeoff) power /thrust/, set engine at takeoff power /thrust/, throttle to takeoff power /thrust/
выходить на р. прямолинейного горизонтального полета гонять двигатель на (взлетном) р. — recover to straight and level flight run the engine at (takeoff) power
изменять р. работы двигателя — change engine power
изменять установленный р. (двиг.) — change power setting
лететь в автоматическом р. управления — fly automatically
лететь в курсовом р. — fly heading (н) mode
лететь в штурвальном р. — fly manually
передавать в телеграфном р. — transmit on c-w /rt/
передавать в радиотелефонном р. — transmit on voice
переключать р. — select mode
переключаться на р. — switch to mode the computer automatically switches to course mode.
переходить (автоматически) в режим (напр., курсовертикаль) — system automatically changes to атт mode
переходить с р. (малого газа) на (взлетный) р. (двиг.) — come from (idle) power to (takeoff) power
проводить р. (30 часовых) испытаний последовательно чередующимися периодами по... часов — conduct а (30-hour) run consisting of alternate periods of... hours
работать в р. — operate on /in/ mode
работать в режиме гпк — operate in dg mode, be servoed to directional gyro
работать в индикаторном р. (о сельсине) — operate as synchro indicator
работать в трансформаторном р. (о сельсине) — operate as synchro transformer
работать на (взлетном) р. (двиг.) — operate at (takeoff) power /thrust/
работать на р. малого газа — idle, operate at idle (power)
увеличивать р. работы (двиг.) (до крейсерского) — add power (to cruising), throttle (to cruising power)
уменьшать p. двигателя (до крейсерского) — reduce power to cruising
устанавливать взлетный р. (двиг.) — set takeoff power /thrust/, set engine at takeoff power
устанавливать компасный р. работы (apk) — select compass mode
устанавливать p. набора высоты — establish climb
устанавливать р. полета — establish flight condition
устанавливать рамочный р. работы (арк) — select loop mode
устанавливать (взлетный) р. работы двигателя — set (taksoff) power /thrust/, set the engine at takeoff power /thrust/
устанавливать p. снижения — establish descent

- adaptive control system
- address selection system
- addressing system
- advice-giving system
- AI planning system
- AI system
- analog computing system
- analog-digital computing system
- analysis information system
- application system
- arabic number system
- arithmetic system
- assembly system
- asymmetrical system
- atomic system
- attached processor system
- audio system
- authoring system
- automated office system
- automatic block system
- automatic checkout system
- automatic control system
- automatic search system
- automatic test system
- automatically programmed system
- automatically taught system
- autoprogrammable system
- axiomatic system
- backup system
- bad system
- bang-bang system
- base-2 system
- basic system
- batch-processing system
- binary system
- binary-coded decimal system
- binary-number system
- biquinary system
- bit-mapped system
- bit-slice system
- black-board expert system
- block parity system
- buddy system
- business system
- bus-oriented system
- bussed system
- CAD system
- call-reply system
- carrier system
- cause-controlled system
- character recognition system
- character-reading system
- chargeback system
- check sum error-detecting system
- chip-layout system
- clock system
- closed loop system
- closed system
- co-authoring system
- code recognition system
- code system
- coded-decimal system
- code-dependent system
- code-insensitive system
- code-sensitive system
- code-transparent system
- coding system
- coincident selection system
- cold system
- color-coded system
- command system
- common-bus system
- communication data system
- communications-oriented system
- complete articulated system
- computer system
- computer-aided design system
- computer-aided system
- computer-based system
- computer-based weapon system
- computerized system
- computing system
- concatenated coding system
- concealment system
- conservative system
- contention system
- continuous presence system
- control system
- controlled system
- controlling system
- coordinate system
- cordonnier system
- costrained vision system
- cross system
- crossbar switch system
- data acquisition system
- data collection system
- data exchange system
- data flow system
- data gethering system
- data handling system
- data management system
- data preparation system
- data processing system
- data reduction system
- data retrieval system
- data storage system
- data system
- data transmission system
- database management system
- database support system
- data-managed system
- decimal number system
- decimal system
- decimal numeration system
- decision support system
- decision-aided system
- decision-making system
- decision-support system
- decision-taking system
- decoding selection system
- decomposable system
- dedicated system
- degenerate system
- design library support system
- design-automation system
- design-verification system
- development support system
- development system
- digital communication system
- digital computing system
- direct-current system
- directly coupled system
- discrete system
- discrete-continuous system
- disk operating system
- display system
- distributed database management system
- distributed function system
- distributed intelligence system
- distributed parameter system
- distributed system
- distribution system
- double intermediate tape system
- down system
- drafting system
- dual system
- dual-computer system
- dual-processor system
- duodecimal number system
- duodecimal system
- duotricenary number system
- duotricenary system
- duplexed computer system
- duplex computer system
- dyadic number system
- dyadic system
- dynamic mapping system
- dynamic scene system
- dynamic support system
- electronic data processing system
- electronic sorting system
- encoding system
- equipment adapted data system
- erasing system
- error-controlled system
- error-correcting system
- error-detecting system
- executive file-control system
- executive system
- expert control system
- expert support system
- expert system
- expert-planning system
- externally pulsed system
- fail-safe system
- fail-soft system
- fan-out system
- fault-tolerant system
- feasible system
- federated system
- feed system
- feedback system
- feedforward control system
- fiche retrieval system
- file control system
- file system
- fixed-lenght record system
- fixed-point system
- fixed-radix numeration system
- floating-point system
- fluid transport system
- follow-up system
- forgiving system
- front-end system
- fuzzy expert system
- generic expert system
- geographically distributed system
- goal-seeking system
- good system
- graceful degradation system
- graphic data system
- graphics display system
- graphics system
- help system
- heterogeneous system
- hexadecimal number system
- hexadecimal system - host system
- hostless system
- host-satellite system
- human visual system
- hunting system
- hypermedia system
- imaging system
- incremental system
- independent system
- indirectly coupled system
- information storage and retrieval system
- information retrieval system
- information handling system
- information management system
- information processing system
- information system
- information-feedback system
- in-plant system
- input/output control system
- instruction system
- instrumentation management system
- integrated system
- intelligence system
- interactive control system
- interactive system
- intercommunicating system
- interlock system
- internal number system
- internal system
- Internet-enabled system
- interrupt system
- isolated system
- kernel system
- key-to-disk/tape system
- knowledge base management system
- knowledge system
- knowledge-based system
- large-scale computing system
- laser communication system
- layered control system - lexicon-driven system
- library reference system
- local-network system
- long-haul system
- lumped-parameter system
- machine tool control system
- machine-limited system
- machine-oriented programming system
- macroinstruction system
- macro system
- magnetic memory system
- magnetic recording system
- magnetic tape plotting system
- mail message system
- mail system
- mailbox system
- management information system
- man-machine system
- mapping system
- map-reading system
- mass memory system
- mass storage system
- master/slave system
- matrix memory system
- memory driver system
- memory system
- message handling system
- message system
- microcomputer system
- microfilm printing system
- midsplit system
- MIMO system
- mixed-base numbering system
- mixed-base number system
- mixed-radix numeration system
- model-based expert system
- modular system
- monitoring system
- monitor system
- mosaic system - multicomputer system
- multidimensional system
- multifrequency system
- multilevel storage system
- multiloop system
- multimaster communication system
- multimicroprocessor system
- multiple computation system
- multiple-bus system
- multiple-coincident magnetic storage system
- multiple-output control system
- multiplex system
- multiport system
- multiprocessing system
- multiprocessor system
- multiprogramming computer system
- multiprogramming system
- multisite system
- multispeaker system
- multistable system
- multitasking operating system
- multiterminal system
- multiuser computer system
- multiuser system
- multiuser operating system
- multivariable system
- multivariate system
- negative-base number representation system
- negative-base number system
- network operating system
- node-replicated system
- noncomputerized system
- nonconsistently based number system
- nondegenerate system
- number representation system
- numbering system
- number system
- numeral system
- numeration system
- numerical system
- octal number system
- octal system
- office automation system
- off-line system
- on-demand system
- one-level storage system
- one-loop system
- one-over-one address system
- on-line system
- open-ended system
- open system
- open-loop system
- operating system
- operational system
- optical memory system
- overdetermined system
- overload-hold system
- page-on-demand system
- panelboard system
- paper-tape system
- parameter-driven expert system
- pattern recognition system
- peek-a-boo system
- peripheral system
- pipeline system
- polled system
- polymorphic system
- polyphase system
- portable system
- positional representation system
- Post-production system
- priority scheduling system
- priority system
- procedural expert system
- process control system
- processor-sharing system
- production control system
- production system
- program system
- programming system
- protection system
- pulse system
- pulse-or-no-pulse system
- pulse-signal system
- punch card computer system
- pure-binary numeration system
- purposeful system
- quadruplex system
- question-answering system
- queueing system
- queue system
- radix numbering system
- radix number system
- reactive system
- reading system
- real-time expert system
- real-time operating system
- real-time system
- reasoning system
- recognition system
- recording system
- recovery system
- reduntant number system
- reduntant system
- reflected binary number system
- reflected binary system
- refreshment system
- remote-access system
- replicating system
- representation system
- request-repeat system
- rerecording system
- residue number system
- residue system
- resource-sharing system
- restorable system
- retrieval system
- retrieval-only system - robotic system
- robot system
- rule-based expert system
- rule-based system
- scalable system
- selection system
- self-adapting system
- self-adjusting system
- self-aligning system
- self-balancing system
- self-check system
- self-contained system
- self-correcting system
- self-descriptive system
- self-learning system
- self-organizing system
- self-sustained oscillation system
- self-test system
- sensor-based system
- sequential scheduling system
- sexadecimal number system
- sexadecimal system
- shared-files system
- shell expert system
- silicon-development system
- simplex system
- single-drive system
- single-inheritance system
- single-phase clock system
- single-site system
- single-user computer system
- SISO system
- skeletal expert system
- slave system
- soft-sectored disk system
- software system
- sound system
- source code control system
- source-destination system
- space-division system
- stabilizing system
- stable system
- stand-alone system
- start-stop system
- state-determined system
- stepped start-stop system
- stereo system
- stochastically disturbed system
- storage system
- stripped-down expert system
- subsplit system
- supervisor control system
- switching system
- symbolic assembly system
- syntactical system
- system explanation system
- system of logic
- system of notation
- system with delay
- system with time lag
- tabulating system
- tape data processing system
- tape drive system
- tape handling system
- tape operating system
- tape plotting system
- tape resident system
- tape-oriented system
- target system
- taught system
- telecommunictions system
- telecontrol system
- terminal system
- ternary number system
- ternary system
- test system
- testbed system
- text-to-speech system
- time-division system
- time-pattern control system
- time-shared system
- time-shared-bus system
- time-sharing system
- timing system
- total system
- translating system
- translation system
- translator writing system
- transmitting system
- tree-structured system
- trusted computer system
- two-failure mode system
- two-level return system
- two-level system
- two-phase clock system
- ultrastable system
- Unified system
- uninterruptible power system
- uniprocessor system
- unrestorable system
- unstable system
- up system
- variable-lenght record system
- virtual system
- virtual-memory operating system
- vision system
- visual system
- voice/audio processing system
- voice-response system
- volunteer system
- weighted number system
- weighted system
- writing system
- xerox copy system
- zero-one system

- 3-D radar
- acoustic radar
- acq radar
- acquisition radar
- acquisition-and-tracking radar
- active radar
- adaptive radar
- advanced design array radar
- aerostat radar
- AEW radar
- AI radar
- airborne radar
- airborne early-warning radar
- airborne intercept radar
- airborne search radar
- airborne sea-search radar
- aircraft radar
- aircraft intercept radar
- airfield control radar
- air intercept radar
- airport surveillance radar
- air route surveillance radar
- air search radar
- air-to-surface-vessel radar
- air traffic control radar
- all-round-looking radar
- anticollision radar
- antisurface vessel radar
- approach-control radar
- area control radar
- array radar
- autofollow radar
- autofollowing radar
- automatic tracking radar
- automotive radar
- autotrack radar
- azimuthal-scanning radar
- backscatter radar
- backsearch radar
- baseband radar
- battery control radar
- battlefield surveillance radar
- beacon radar
- beam-rider radar
- beam-transmitter radar
- bistatic radar
- capture radar
- chaser radar
- chirp radar
- chirped radar
- close control radar
- cloud-collision radar
- coastal defense radar
- coastal defense radar for detecting U-boats
- codiphase radar
- coherent radar
- coherent laser radar
- coherent pulse radar
- coho radar
- collision-avoidance radar
- collision-warning radar
- color radar
- conflict radar
- conical-scanning radar
- continuous-wave radar
- continuous-wave Doppler radar
- counter-countermeasure radar
- cw radar
- deep-space surveillance radar
- detection radar
- digital radar
- discrimination radar
- diversity radar
- Doppler radar
- Doppler-free coherent radar
- down-looking radar
- dual Doppler radar
- dual frequency radar
- early-warning radar
- electronically agile radar
- electronically scanned array radar
- electrooptic radar
- fan-beam-radar
- fire-control radar
- flight path radar
- FM radar
- FM cw radar
- forward-looking radar
- frequency agile pulse radar
- frequency-diversity radar
- frequency-hopping radar
- frequency-modulated radar
- frequency scan radar
- gap-filler radar
- GCA radar
- general-purpose radar
- ground radar
- ground-based radar
- ground control radar
- ground-controlled approach radar
- ground-mapping radar
- ground-position radar
- ground surveillance radar
- ground-to-air radar
- ground-waveradar
- guidance radar
- guided radar
- guiding radar
- hand radar
- hand-held radar
- hard point demonstration array radar
- height-finder radar
- height-finding radar
- high-power acquisition radar
- high PRF radar
- high pulse-repetition-frequency radar
- HISS radar
- hologram matrix radar
- holographic radar
- holographic ice surveying system radar
- HT finder radar
- hypothetical radar
- identification friend-or-foe radar
- IFF radar
- imaging radar
- incoherent scatter radar
- infrared radar
- instrumentation radar
- interferometer radar
- interplanetary radar
- interrogating radar
- interrogation radar
- ionospheric radar
- jammed radar
- landing radar
- landing-assist radar
- laser radar
- laser-diode radar
- laser-Raman radar
- light radar
- line-of-sight radar
- long-pulse radar
- long-range radar
- look-down radar
- low-range radar
- lunar radar
- man-borne radar
- mapping radar
- medium-range radar
- meteorological radar
- microwave radar
- microwave-modulator optical radar
- miniature radar
- missile-track radar
- missile-tracking radar
- monopulse radar
- monostatic radar
- moving-target indication radar
- moving-target indicator radar
- multifrequency radar
- multifunction array radar
- multimode radar
- multistatic radar
- navigation air radar
- navigational radar
- noise radar
- noise-modulated radar
- noncoherent pulse radar
- off-boresight radar
- offset Doppler radar
- omnirange radar
- on-line radar
- optical radar
- orbital rendezvous radar
- OTH radar
- overlap radar
- over-the-horizon radar
- panoramic radar
- passive radar
- pencil-beam radar
- phase-comparison radar
- phased-array radar
- phase-sensing monopulse radar
- planetary radar
- plan-position-indicator radar
- PN encoded radar
- polychromatic radar
- position radar
- power radar
- precision approach radar
- primary radar
- pseudonoise encoded radar
- pulse radar
- pulse-compression radar
- pulse Doppler radar
- pulse-modulated radar
- random signal radar
- range Doppler radar
- range-gated radar
- range only radar
- reconnaissance radar
- rendezvous radar
- satellite track radar
- satellite tracking radar
- search radar
- secondary radar
- semiactive radar
- sensing radar
- short-pulse radar
- Shuttle imaging radar
- side-looking radar
- side-looking airborne radar
- side-looking airborne modular multimission-radar
- single-beam radar
- sky-wave radar
- space radar
- space-based radar
- spacecraft-borne radar
- space-diversity radar
- stacked-beam radar
- step-frequency radar
- storm radar
- subsurface pulse radar
- subterranian radar
- sum-and-difference monopulse radar
- surface-wave radar
- surveillance radar
- swept-frequency radar
- synthetic-aperture radar
- synthetic interferometer radar
- tail warning radar
- target-track radar
- taxi radar
- terminal radar
- terrain-avoidance radar
- terrain-clearance radar
- terrain-following radar
- tethered-aerostat radar
- three-dimensional radar
- tracker radar
- tracking radar
- transionospheric radar
- ultra wide band radar
- UWB radar
- V-beam radar
- vehicle radar
- velocity radar
- very long-range radar
- very short-range radar
- video pulse radar
- volumetric radar
- wavefront-reconstruction radar
- weather radar
- wide-band radar
- wind-finding radar
- zenith-pointing radar

- acoustic radar
- acq radar
- acquisition radar
- acquisition-and-tracking radar
- active radar
- adaptive radar
- advanced design array radar
- aerostat radar
- AEW radar
- AI radar
- air intercept radar
- air route surveillance radar
- air search radar
- air traffic control radar
- airborne early-warning radar
- airborne intercept radar
- airborne radar
- airborne search radar
- airborne sea-search radar
- aircraft intercept radar
- aircraft radar
- airfield control radar
- airport surveillance radar
- air-to-surface-vessel radar
- all-round-looking radar
- anticollision radar
- antisurface vessel radar
- approach-control radar
- area control radar
- array radar
- autofollow radar
- autofollowing radar
- automatic tracking radar
- automotive radar
- autotrack radar
- azimuthal-scanning radar
- backscatter radar
- backsearch radar
- baseband radar
- battery control radar
- battlefield surveillance radar
- beacon radar
- beam-rider radar
- beam-transmitter radar
- bistatic radar
- capture radar
- chaser radar
- chirp radar
- chirped radar
- close control radar
- cloud-collision radar
- coastal defense radar for detecting U-boats
- coastal defense radar
- codiphase radar
- coherent laser radar
- coherent pulse radar
- coherent radar
- coho radar
- collision-avoidance radar
- collision-warning radar
- color radar
- conflict radar
- conical-scanning radar
- continuous-wave Doppler radar
- continuous-wave radar
- counter-countermeasure radar
- cw radar
- deep-space surveillance radar
- detection radar
- digital radar
- discrimination radar
- diversity radar
- Doppler radar
- Doppler-free coherent radar
- down-looking radar
- dual Doppler radar
- dual frequency radar
- early-warning radar
- electronically agile radar
- electronically scanned array radar
- electrooptic radar
- fan-beam-radar
- fire-control radar
- flight path radar
- FM cw radar
- FM radar
- forward-looking radar
- frequency agile pulse radar
- frequency scan radar
- frequency-diversity radar
- frequency-hopping radar
- frequency-modulated radar
- gap-filler radar
- GCA radar
- general-purpose radar
- ground control radar
- ground radar
- ground surveillance radar
- ground-based radar
- ground-controlled approach radar
- ground-mapping radar
- ground-position radar
- ground-to-air radar
- ground-wave radar
- guidance radar
- guided radar
- guiding radar
- hand radar
- hand-held radar
- hard point demonstration array radar
- height-finder radar
- height-finding radar
- high PRF radar
- high pulse-repetition-frequency radar
- high-power acquisition radar
- HISS radar
- hologram matrix radar
- holographic ice surveying system radar
- holographic radar
- HT finder radar
- hypothetical radar
- identification friend-or-foe radar
- IFF radar
- imaging radar
- incoherent scatter radar
- infrared radar
- instrumentation radar
- interferometer radar
- interplanetary radar
- interrogating radar
- interrogation radar
- ionospheric radar
- jammed radar
- landing radar
- landing-assist radar
- laser radar
- laser-diode radar
- laser-Raman radar
- light radar
- line-of-sight radar
- long-pulse radar
- long-range radar
- look-down radar
- low-range radar
- lunar radar
- man-borne radar
- mapping radar
- medium-range radar
- meteorological radar
- microwave radar
- microwave-modulator optical radar
- miniature radar
- missile-track radar
- missile-tracking radar
- monopulse radar
- monostatic radar
- moving-target indication radar
- moving-target indicator radar
- multifrequency radar
- multifunction array radar
- multimode radar
- multistatic radar
- navigation air radar
- navigational radar
- noise radar
- noise-modulated radar
- noncoherent pulse radar
- off-boresight radar
- offset Doppler radar
- omnirange radar
- on-line radar
- optical radar
- orbital rendezvous radar
- OTH radar
- overlap radar
- over-the-horizon radar
- panoramic radar
- passive radar
- pencil-beam radar
- phase-comparison radar
- phased-array radar
- phase-sensing monopulse radar
- planetary radar
- plan-position-indicator radar
- PN encoded radar
- polychromatic radar
- position radar
- power radar
- precision approach radar
- primary radar
- pseudonoise encoded radar
- pulse Doppler radar
- pulse radar
- pulse-compression radar
- pulse-modulated radar
- radar without line of sight
- random signal radar
- range Doppler radar
- range only radar
- range-gated radar
- reconnaissance radar
- rendezvous radar
- satellite track radar
- satellite tracking radar
- search radar
- secondary radar
- semiactive radar
- sensing radar
- short-pulse radar
- Shuttle imaging radar
- side-looking airborne modular multimission radar
- side-looking airborne radar
- side-looking radar
- single-beam radar
- sky-wave radar
- space radar
- space-based radar
- spacecraft-borne radar
- space-diversity radar
- stacked-beam radar
- step-frequency radar
- storm radar
- subsurface pulse radar
- subterrainian radar
- sum-and-difference monopulse radar
- surface-wave radar
- surveillance radar
- swept-frequency radar
- synthetic interferometer radar
- synthetic-aperture radar
- tail warning radar
- target-track radar
- taxi radar
- terminal radar
- terrain-avoidance radar
- terrain-clearance radar
- terrain-following radar
- tethered-aerostat radar
- three-dimensional radar
- tracker radar
- tracking radar
- transionospheric radar
- ultra wide band radar
- UWB radar
- V-beam radar
- vehicle radar
- velocity radar
- very long-range radar
- very short-range radar
- video pulse radar
- volumetric radar
- wavefront-reconstruction radar
- weather radar
- wide-band radar
- wind-finding radar
- zenith-pointing radar

- 2D design system
- 2-D draughting system
- 2D milling CAM system
- 3 nonsimultaneous axes control system
- 3D CAD system
- 3D design system
- 3D milling CAM system
- 3-D surface-modeling system
- 3-D system
- abrasive waterjet cutting system
- absolute control system
- absolute dimension measuring system
- accident-protection system
- accountancy system
- accounting data system
- ACO system
- acoustic feedback control system
- acquisition system
- active enclosure system
- adaptable system
- adaptive CNC system
- adaptive control constraint system
- adaptive control system
- adaptive pulsing system
- adaptive robot system
- add-on NC programming system
- administrative information data system
- administrative information system
- ADR system
- advanced command data system
- advanced data analysis system
- advanced data display system
- advanced display system
- advanced integrated data system
- advanced interactive debugging system
- advanced management information system
- advisory system
- AGV system
- air flotation system
- air-bearing system
- air-cooling system
- air-delivery system
- air-gaging system
- airlock system
- air-oil mist lubrication system
- air-plasma arc-profiling system
- air-purge system
- alarm system
- all-enveloping guard system
- analog computing system
- analog recording system
- angstrom-positioning system
- antideflection system
- antilock brake system
- antisag system
- application-specific system
- APT generating expert system
- Archimedes system
- array system
- AS/RS system
- assembly management system
- assembly system
- attitude display system
- autolube system
- automated communications and messages processing system
- automated design and optimization of control system
- automated design system
- automated digital design system
- automated industrial management system
- automated information data system
- automated information dissemination system
- automated information retrieval system
- automated inventory distribution system
- automated machining system
- automated management information system
- automated management system
- automated measuring system
- automated parts input-output system
- automated reliability and maintenance management system
- automated storage control system
- automatic alignment-and-centering system
- automatic call distribution system
- automatic CAM system
- automatic chuck-changing system
- automatic data acquisition system
- automatic data distribution system
- automatic data system
- automatic diagnostic-and-recovery system
- automatic display plotting system
- automatic distributive numerical control system
- automatic fixturing system
- automatic gaging-and-compensating system
- automatic measurement-and-compensation system
- automatic message accounting system
- automatic message distribution system
- automatic pallet storage/retrieval system
- automatic program transfer system
- automatic record evaluation system
- automatic telemetry system
- automatic test analysis system
- automatic test system
- automatic testing, evaluating and reporting system
- automatic tool cassette changer system
- automatic tool retraction system
- automatic tool retraction/correction/reentry system
- automatic tool wear/tool broken sensing system
- automatically taught system
- automation system
- autonomous system
- autopatch system
- AWS system
- axis drive system
- axis motor system
- axis-stopping system
- backlash-free friction system
- back-to-back system
- balance system
- balanced system of forces
- balanced system
- bar feed system
- bar pulling system
- bar pusher system
- barring coding system
- base coordinate system
- base data system
- base file system
- base operating information system
- basic disk operating system
- basic hole system
- basic input/output system
- basic NC system
- basic programming system
- basic shaft system
- batching system
- batch-machining system
- battery system
- BCC management information system
- beam delivery system
- belt turnover system
- belt twist system
- binary system
- binary vision system
- biped robotic system
- block-tool system
- block-type tool change system
- bonded stores system
- boring system
- bought-in control system
- brake system
- branch information system
- breakaway system
- breathing system
- broad system of ordering
- BTA deep-hole-drilling system
- BTA-style deep-hole-drilling system
- bug-free system
- building block system
- bulk system
- business information system
- buy-and-plug-in system
- C/C system
- cable and hose carrying system
- CAD access system
- CAD system
- CAD/CAM system
- CAD/CAM/CAE and product data management system
- CAD/CAM/CAE system
- CAD/CAPP/CAM system
- CADAR system
- CAD-integrating system
- CAD-only system
- CAE system
- CAE/CAD/CAM system
- CAG system
- CAM system
- cam-and-lever system
- capacitance-based measuring system
- CAPP system
- capture system
- carrierband system
- cart/pallet transfer system
- Cartesian coordinate system
- cassette jaw-change system
- cell control system
- cell management system
- cell-type system
- cellular manufacturing system
- central analog data distributing and controlling system
- central automatic message accounting system
- central storage system
- centralized control system
- centralized coolant and extractor system
- centralized swarf conveying system
- centralized swarf removal system
- chain conveyor system
- check system
- checking system
- checkout system
- chiller system
- chip conveyor system
- chip guard system
- chip-evacuation system
- chuck/chuck jaw changing system
- chucking system
- chuck-jaw system
- chuck-loading system
- CIM system
- circular monitoring system
- circular part-processing system
- circulating lubrication system
- circulating oil system
- circulation system
- clamping system
- closed cooling system
- closed loop control system
- closed loop machine control system
- closed loop size control system
- closed loop system
- closed-proprietary system
- CM system
- CNC hardware system
- CNC machine tool system
- CNC programming system
- CNC system
- CNC transfer system
- CNC-ACC system
- CNC-control system
- coherent system of units
- collecting system
- collet pad top jaw system
- combined cooling system
- combined production system
- command-line NC system
- commercial vision system
- communication system
- companion system
- comprehensive power measurement system
- computer analysis and design system
- computer automation real-time operating system
- computer data communication system
- computer NC system
- computer system
- computer vision system
- computer-aided design support system
- computer-aided dispatch system
- computer-aided gaging system
- computer-aided programming system
- computer-aided telemetry system
- computer-aided test system
- computer-assisted command system
- computer-assisted message processing system
- computer-assisted microfilm retrieval system
- computer-assisted operation sequence planning system
- computer-automated machine-tool system
- computer-automated test system
- computer-based management system
- computer-based message system
- computer-controlled materials-handling system
- computer-controlled system
- computer-coordinated measuring system
- computer-directed swing-arm tool-changing system
- computer-driven control system
- computer-hosted manufacturing system
- computer-integrated manufacturing system
- computer-integrated system
- computerized information retrieval system
- computerized machine control system
- computerized manufacturing system
- computerized numerical control system
- computerized production control system
- computerized shopfloor data collection system
- computer-oriented production management system
- computer-oriented system
- computing system
- concurrent force system
- conductor system
- conservative system
- constant delivery system
- constant volume system
- constant-contact scanning system
- constraint satisfaction system
- continuous feedback control system
- continuous flow system
- continuous-path CNC system
- continuous-path control system
- contouring control system
- contouring system
- controlled path system
- controlling system
- conventional ACC system
- conversational analysis and drafting system
- conveying system
- conveyor system
- conveyoring system
- conveyorized work-handling system
- coolant clarification system
- coolant laundering system
- coolant mist system
- coolant recirculating system
- coolant recovery system
- coolant recycling system
- coolant supply system
- coolant-circulating system
- coolant-thru-body system
- cooling system
- coordinate drive system
- coordinate system
- coprocessor board system
- copymill control system
- corporate information and office system
- coupling system
- CPS system
- CRT control system
- CRT system
- customer-oriented system
- customized FMS control system
- cut-piece transfer system
- cycloidal tooth system
- data base management system
- data communication system
- data control system
- data input management system
- data management system
- data origination system
- data processing system
- data retrieval system
- data transfer system
- datum system for geometrical tolerancing
- datum system
- DDM system
- decentralized DNC system
- decision enabling system
- decision support system
- dedicated production system
- deep-hole-drilling system
- defect-free machining system
- delivery system
- demand pull flexible system
- demand push flexible system
- departmental management system
- descaling system
- design coordinate system
- design support system
- design-automation system
- design-for-manufacturing system
- design-with-feature system
- desk-top publishing system
- deterministic system
- dexel-based system
- diagnostic communication control system
- diagnostic computer control system
- dialog system
- diamond-lapping system
- digital readout system
- digitizing system
- digitizing/data capture system
- dimensional verification system
- direct impingement starting system
- direct lubrication system
- direct NC system
- discrete-continuous system
- dispatcher system
- distributed computer system
- distributed mass-spring system
- distributed microprocessor system
- distributed processing system
- distributed quality system
- distributed system
- distributive numerical control system
- DNC flexible machining system
- DNC machine control system
- DNC machine tool control system
- DNC system
- DNC/FM system
- document processing system
- document retrieval system
- document search system
- domain-expert system
- Doppler system
- DOS CAM system
- double tube system
- dowel pin system
- DRO system
- drop-feed-lubrication system
- DTP system
- dual laser optical system
- dual laser referencing system
- dual system
- dual-beam LDDM system
- dual-pallet shuttle system
- dual-shaft electric propulsion system
- dynamic beam focusing laser system
- dynamic data system
- dynamic mapping system
- early warning system
- eddy current damper system
- edge-sensing system
- edge-type positioning system
- eight-station pallet system
- electrical contact tracing system
- electrofluidic control system
- emergency protection system
- enclosure system
- encoder checking system
- endpoint locating system
- energy-adaptive system
- energy-saving drive system
- engine starting system
- entry-level NC system
- environmental control system
- equivalent rigid link system
- equivalent systems of forces
- ESD system
- estimating system
- example-driven system
- expert control system
- expert process planning system
- expert system
- external box system
- extractor system
- fact retrieval system
- factory automation system
- fault detection system
- fault-signal system
- FBG system
- feasibility routing system
- feature-based CAM system
- feature-based system
- feed system
- feedback control system
- feedback gaging system
- feedback position control system
- feedback system
- feed-drive system
- feedforward compensatory control system
- feed-only AC system
- feed-overriding system
- FFS system
- file control system
- finite capacity scheduling system
- fixed coordinate system
- fixed-feature NC system
- fixed-rail system
- fixture design system
- fixture system
- fixturing system
- flanged pipe system
- flexible assembly system
- flexible automated manufacturing system
- flexible automation system
- flexible computer-controlled robotic system
- flexible fabricating system
- flexible fixturing system
- flexible handling system
- flexible laser optical system
- flexible laser system
- flexible lathe system
- flexible machine system
- flexible machining center system
- flexible machining system
- flexible manufacturing system
- flexible NC system
- flexible press system
- flexible tooling system
- flexible transfer system
- flexible turning system
- flood coolant system
- flow-line production system
- flow-type manufacturing system
- fluid management system
- fluid power system
- flush-type cooling system
- fly system
- FMS operating system
- FMS/CAD/CAM system
- FMS-type production system
- force measurement system
- force sensory system
- force system
- force-sensing system
- forecasting system
- four-station pallet system
- four-tier quality system
- FROG navigation system
- FROG system
- full-blown system
- fully specified system
- gage system
- gaging computer system
- gaging-and-compensating system
- gantry loading system
- gantry-based turning system
- gantry-style motion system
- gas-turbine starting system
- gating system
- gear roller system
- gear system
- gear testing system
- general information retrieval system
- generative planning system
- generic control system
- generic messaging system
- generic system
- glass fiber system
- glazing system
- goal-seeking system
- graphic numerical control system
- graphic processing system
- graphics system
- graphics-oriented system
- grating measuring system
- gravity oil system
- gray scale imaging system
- grinder vision system
- group control system
- guarding system
- guidance system
- guiding system
- handling system
- handwriting-input system
- hard-automated system
- hardware NC system
- hardware support system
- head change system
- head changer system
- head-changing flexible manufacturing system
- help system
- hierarchical coding system
- hierarchical control system
- hierarchical information control system
- high-noise-immunity system
- high-rise system
- high-speed positioning system
- high-speed-processor control system
- high-volume system
- Hirth gear-tooth system
- holding system
- holding tool system
- hole system
- holonomic system
- host computer-assisted programming system
- host distributive numerical control system
- hybrid computing system
- hydraulic oil system
- hydraulic system
- hydraulic-circuit system
- hypertext system
- ID system
- IDNC system
- illumination system
- image detection system
- image processing system
- imaging system
- IMC system
- immersion-washing system
- inconsistent system of equations
- incremental measuring system
- index system
- indirect lubrication system
- individual lubrication system
- inductive telemetry system
- inductively guided cart system
- industrial vision system
- in-feed system
- inference system
- in-floor chip-disposal system
- information infrastructure system
- information logical system
- information processing system
- information storage and retrieval system
- information system
- information-gathering system
- information-management system
- information-sharing system
- infrared imaging system
- infrared system
- in-house minicomputer system
- in-house system
- inlet control system
- in-process gaging system
- in-process sensing system
- in-process storage system
- insert-selection system
- instrumentation system
- insulating system
- integral movement monitoring system
- integrated CAD/CAPP/CAM system
- integrated CAM system
- integrated circuit numerical control system
- integrated computer system
- integrated information system
- integrated machine system
- integrated machining system
- integrated manufacturing and assembly system
- integrated manufacturing system
- integrated NC machine system
- integrated production system
- integrated sensor system
- intelligent control system
- interactive control system
- interactive graphics processing system
- interactive manufacturing control system
- interconnection system
- interdepartmental communication system
- interferometer measuring system
- interlocking system
- interrupt-driven system
- inventory-management system
- involute tooth system
- IR fault-signal system
- IR system
- ISO system of limits and tolerances
- isolated word recognition system
- jig boring measuring system
- job shop-type flexible system
- joint-actuation system
- just-in-time production system
- kanban pull system
- kinetic control system
- kitting system
- knowledge base management system
- knowledge system
- knowledge-based information system
- knowledge-based system
- krypton laser system
- labeling system
- labor-intensive system
- language-based NC system
- laser beam orientation system
- laser beam positioning system
- laser calibration system
- laser combination energy system
- laser digitizing system
- laser driving system
- laser full automated system
- laser inspection system
- laser interferometer measuring system
- laser machining system
- laser metalworking system
- laser micrometer system
- laser monitoring system
- laser mount system
- laser optical transformation system
- laser pulse power system
- laser pump system
- laser referencing system
- laser thread measurement system
- laser transducer system
- laser-cutting system
- laser-gaging system
- layered control system
- LDDM system
- lead screw drive system
- learning system
- library reference system
- library system
- light guide system
- light recognition system
- line motion control system
- line motion system
- line path system
- linear index system
- linear system of constant coefficients
- linear time invariant system
- linear time-varying system
- linear-encoder-equipped system
- LMFC system
- load/unload system
- loading robot system
- load-monitoring system
- local communications system
- logistics system
- look-up table system
- low-loss optical system
- low-volume lubricant delivery system
- lube system
- lubrication system with continuous delivery
- lubrication system with cyclic delivery
- lubrication system with performance control
- lubrication system without performance control
- lubrication system
- M system
- machine control system
- machine coordinate system
- machine health-monitoring system
- machine management system
- machine surveillance system
- machine tool capability-conditioning system
- machine tool system
- machine vision system
- machine/control system
- machine/tool/workpiece system
- machine-flexible system
- machine-zero reference system
- machining-cell system
- magnetic control system
- magnetic shaft suspension system
- main control system
- maintenance tracking system
- make-up system
- management control system
- management information system
- management system
- management-and-manufacturing system
- managerial reporting system
- man-computer system
- man-machine system
- man-plus-machine system
- manual data input system
- manual programming system
- manufacturing execution system
- manufacturing optimization system
- manufacturing software system
- manufacturing system
- many-degrees-of-freedom system
- many-variable system
- mass-elastic system
- master manufacturing control system
- master-slave control system
- material flow system
- material movement system
- material storage system
- materials-handling control system
- materials-handling system
- matrix array system
- matrix-type system
- MDI contouring control system
- MDI control system
- MDI NC system
- mean line system
- measurement/inspection system
- measuring coordinate system
- measuring system
- measuring/compensation system
- mechanical interface coordinate system
- memory NC system
- memory system
- menu drive system
- menu system
- menu-driven programming system
- metalforming production system with robots
- metalworking laser system
- metamorphic system
- metareasoning system
- metering system
- metrology system
- MIC system
- micro CAD/CAM programming system
- microadjustment system
- microchip-managed control system
- microdispensing system
- microintegrated system
- microload system
- micropackaged distributed system
- microprocessor based system
- microprocessor CNC system
- microprocessor system
- microprocessor-development system
- microstep control system
- microwave drill detection system
- milling CAM system
- milling system
- minicomputer-based numerical control system
- minicomputer-based system
- minicomputer-based test system
- miniload automated storage and retrieval system
- miniload system
- minimal constraint system
- minimum phase shift system
- mist-cooling system
- mixed forging-machining system
- mobility system
- model reference adaptive system
- moderately sized manufacturing system
- modular clamping system
- modular component tooling system
- modular fixture system
- modular holding system
- modular system
- modular tooling system
- modular work holding system
- monitoring system
- monorail material handling system
- motor position sensing system
- mounting system
- MPM system
- MRC system
- MRP system
- MS-DOS system
- multiaxis laser system
- multimachine system
- multimedia system
- multinetwork system
- multipallet system
- multiple computer system
- multiple laser technology system
- multiple pallet changer system
- multiple pallet handling system
- multiple parts feeding system
- multiple sensory system
- multiple spindle head handling-and-changing system
- multiple system of indexing
- multiple-gun spraying system
- multipoint lubrication system
- multipoint network control system
- multiprocessing system
- multiprocessor NC system
- multiprocessor system
- multiproduct manufacturing system
- multiprofile tool system
- multiprogramming system
- multirobot system
- multisensor system
- multiserver queueing system
- multistage system
- multitasking control system
- multiterminal system
- multiuser system
- multivendor information system
- multiwindowing software system
- Nagare system
- narrowly defined expert system
- national information system
- navigation system
- NC contouring system
- NC machine system
- NC part-programming system
- NC system
- NC tooling system
- NC/TP system
- nesting system
- network computer system
- network switching system
- network system
- noise diagnostic system
- noncircular copy-turning system
- noncompensated system
- noncontact laser marking system
- noncontact microwave system
- nonexpert system
- non-NC system
- numerical computer control system
- numerical contour control system
- numerical control system
- numerically controlled tool point system
- object-oriented system
- office system
- office-based programming system
- off-line adviser-type expert system
- off-line programming system
- off-line system
- off-the-shelf system
- oil mist system
- oil scavenge system
- oil system
- oil wash system
- oil-recirculating system
- oligarchical manufacturing system
- OLP system
- one man/one machine system
- one man-one operation-one job system
- one-machine flexible system
- one-piece tape spar-measuring system
- one-shot lubrication system
- on-line information system
- on-line process system
- on-line retrieval system
- on-line system
- on-line tool control system
- on-machine gaging system
- on-machine probing system
- on-off control system
- open architecture system
- open cooling system
- open system
- open-front system
- open-loop control system
- operating system
- operational system
- operator guidance system
- operator-controlled NC system
- optical detection system
- optical laser ranging system
- optical MAP system
- optical measurement/inspection system
- optical recognition system
- optical system for laser processing
- optical tracer backup system
- optical transmission system
- opti-feed system
- optimal-position control system
- order-driven system
- order-entry system
- order-picking system
- oscillating system
- oscillatory system
- out-feed system
- output collecting system
- overall system
- p.-t.-p. NC system
- package confinement system
- paging system
- pallet conveyor system
- pallet gripper system
- pallet ID system
- pallet storage system
- pallet storage/changer system
- pallet/platen transfer system
- pallet/robot flexible-machining system
- pallet-based materials handling system
- pallet-based system
- pallet-changer system
- pallet-coding system
- pallet-handling system
- palletized tool magazine system
- pallet-loading system
- pallet-moving system
- pallet-shuttle change system
- pallet-transfer system
- pallet-transport system
- paperless NC system
- parallel force system
- parallel lubrication system
- parametric CNC system
- part flow system
- part handling-and-storage system
- part program-editing system
- part queue system
- part-conveying system
- partial laser system
- part-programming system
- part-retrieval system
- passively mode-locked laser system
- path control system of a machine
- path control system
- pattern recognition system
- pattern tracing system
- pattern-directed system
- PC system
- PC-based CAD system
- PC-based vision system
- pendant-mounted CNC system
- perceptual system
- permanent electro system
- personal computer-based robotic vision system
- phase switching control system
- photogrammetric vision system
- photooptic tracing system
- photooptical tracing system
- piece rate system
- plane system of forces
- planner-oriented system
- plant-integration system
- platen system
- platform-independent CAM system
- playback system
- plugboard control system
- plugboard programming system
- point-to-point system
- popular laser system
- position control system
- positioning control system
- postprocess inspection system
- postprocess system
- postprocess-feedback gaging system
- potentiometer-setting system
- power generating system
- power system
- powered clamping system
- powered track system
- powerful robot system
- precision positioning system
- predictive machinability system
- predictive maintenance system
- pre-emptive system
- pregaging system
- preload system
- preset tooling system
- presetting system
- prismatic flexible manufacturing system
- prismatic machining system
- probe communication system
- problem-oriented information system
- process planning system
- process-flexible system
- production control system
- production expert system
- production-monitoring system
- productions system
- product-testing system
- programmable automation system
- programmable control system
- programmable logic control system
- programmable power monitoring system
- programmed sequence control system
- programming system
- proof-of-concept system
- proprietary NC system
- propulsion system
- propulsive system
- protection system
- prototype system
- prototyping system
- pull system of production
- pull system
- punch tape NC system
- purpose-made materials feeding system
- push system
- qualitative system
- quality control system
- quality system
- quantity produced systems
- question-and-answer system
- question-answering system
- queuing system
- quick-change system
- quick-change workpiece-fixturing system
- quick-change-cutter system
- rack system
- rack-picking system
- rail-borne robotic handling system
- rail-guided transport system
- random mission system
- random mix system
- random order system
- ranging system
- readout system
- ready-to-go system
- real-time vision system
- recirculation system
- rectangular coordinate system
- rectangular triordinate system
- reeving system
- reference retrieval system
- reference system
- reflecting high-power beam optical system
- register system
- registration system
- relay ladder logic system
- reporting system
- reprographic system
- resolver system
- restraint system
- RETIC system
- retrieval system
- retrofit system
- return spring system
- RGV pallet delivery system
- rigid track workpiece transport system
- rigid transfer system
- robot control system
- robot gantry storage-and-retrieval system
- robot learning system
- robot parts-handling system
- robot system
- robot teaching system
- robot tool changing system
- robot-based turning system
- robotic system
- robotic vision system
- robotics CAD system
- robotized metalforming system
- robot-like inspection system
- robot-measuring system
- rod memory system
- roller system
- roll-generating system
- rotary transfer system
- rotary-type tool-mounting system
- rotational system
- routing-flexible system
- rule-based expert system
- running fail-safe system
- running system
- run-time system
- safety actuation system
- safety system
- scale back system
- seam tracking laser processing system
- seam-tracking system
- security system
- selective assembly system
- selective control system
- self-adapting system
- self-contained starting system
- self-contained system
- self-monitoring measuring system
- self-optimizing adaptive control system
- self-programming NC system
- self-teaching system
- self-test system
- sensing system
- sensor system
- sensor-based system
- sensory control system
- sensory feedback system
- sensory interactive system
- sensory-processing system
- sentence recognition system
- sequencing control system
- sequential control system
- series lubrication system
- service system
- servo control system
- servo drive system
- servo positioning system
- servo transducer system
- servo-controlled blade-feed-pressure system
- setting system
- SFP system
- shaft system
- shared tools system
- shopfloor communication message system
- shopfloor part-programming system
- shopfloor programming system
- shopfloor-programming control system
- short-closed oil system
- shuttle car system
- shuttle system
- shuttle-type container system
- side-loading pallet system
- sign system
- signature-analysis system
- silhouetting system
- single system
- single-board computer system
- single-cell system
- single-line lubrication system
- single-point lubrication system
- single-stage system
- single-tube system
- single-unit machining system
- single-variable system
- sinking system
- six-station pallet system
- size-monitoring system
- skidless system
- skid-type system
- small knowledge system
- small scale system
- small-batch manufacturing system
- sociotechnical system
- software-based system
- software-operating system
- solid model CAD system
- solid modeling system
- solids-based system
- sonic digitizing system
- space-monitoring sensor system
- special-purpose CNC system
- special-purpose material handling system
- speech-understanding system
- spindle airblast system
- spindle-probe system
- splash lubrication system
- split-type of tooling system
- spray lubrication system
- sprocket-chain system
- stabilization system
- stabilizing system
- stacking system
- stand-alone system
- standard control system
- standard unit system
- starting system
- statistical process control system
- steady-state system
- stepping motor drive system
- stocker system
- stocking system
- stop-bolt locking system
- storage system
- storage-and-retrieval system
- storage-retrieval system
- straight cut control system
- straight-line control system
- stress calculations infinite element system
- structurally stable system
- structurally unstable system
- stub-tooth system
- subloop system
- supervision system
- supervisory computer control system
- supervisory control system
- surface-measurement system
- surveillance system
- suspension system
- swarf conveyance system
- swarf-management system
- swarf-removal system
- switching system
- synthetic vision system
- system of dimensioning
- system of forces
- system of limits and fits
- system of quantities
- system of the machine retaining devices
- system of units
- tactile sensing system
- tailored NC system
- tailor-made system
- tape-oriented system
- target system
- teach system
- teachable-logic control system
- teaching system
- teach-mode programming system
- technology-intensive system
- telecommunication system
- telemetry gage system
- telemetry system
- teleoperated system
- telepresence system
- telerobotic system
- ten-station pallet system
- term system
- test system
- testing system
- text organizing system
- thermal control system
- thermal enclosure system
- thermal propulsion system
- thread measurement system
- thread measuring system
- three-dimensional CAM system
- three-dimensional coordinate system
- three-wire thread measuring system
- through feed system
- through-the-tool system
- time control system
- time cycle system
- time-shared system
- time-sharing NC programming system
- time-sharing system
- tool animation system
- tool breakage prevention system
- tool change system
- tool condition monitoring system
- tool coolant system
- tool deflection calibration system
- tool identification tag system
- tool life control system
- tool life management system
- tool magazine exchanger system
- tool management system
- tool position-compensating system
- tool shank cleaning system
- tool storage and transport system
- tool storage/management system
- tool-associated system
- tool-clamp system
- tool-holder-work system
- tool-ID system
- tooling AGV system
- tooling system
- tool-in-hand system
- tool-in-use system
- tool-machine system
- tool-monitoring system
- tool-mounting system
- tool-presetting system
- tool-probing system
- tool-to-turret connection system
- tool-transfer system
- torque-monitoring system
- total system
- total-loss lubrication system
- touch-probe digitizer system
- touch-probe digitizing system
- touch-probe system
- towline cart system
- towline conveyor system
- towline handling system
- towline material handling system
- towline transfer system
- tracer control system
- tracing system
- track system
- tracking/scheduling system
- track-monitoring system
- transfer system
- translating system
- transmission system
- transporter system
- traverse-metering system
- tray-type transfer system
- triangulation system
- tribomechanical system
- tri-level stocker system
- triordinate system
- trolley control system
- trouble-free control system
- T-slot system
- tuned system
- turning system
- turning-and-chucking system
- turnkey computer control system
- turnkey system
- turret probing system
- turret tooling system
- two-line lubrication system
- two-machine system
- two-pallet exchange system
- two-shift system
- two-tier inspection system
- unattended machining system
- unattended production system
- uncertain system
- unified system
- unit bore system
- unit system
- unit-build system
- unit-load automated storage and retrieval system
- unit-load system
- UNIX-based 32-bit computer system
- unmonitored control system
- unstable system
- user identification system
- user's CAD system
- V coding system
- vacuum system
- variable pallet system
- variable-coefficient system
- variable-gain ACC system
- variable-mission system
- versatile data acquisition system
- vertical carousel system
- vertical rotating warehouse system
- vibration system
- vibratory system
- video measuring system
- video-based measurement system
- viewing system
- virtual design system
- virtual storage system
- vision guidance system
- vision metrology system
- vision optical system
- vision sensor system
- vision system
- vision tool-presetting system
- vision-based inspection system
- vision-based system
- visual computing system
- visual inspection system
- VME-based system
- voice data entry system
- voice system
- voice-input system
- volume-flexible system
- volume-metric lubrication system
- voluntary standards system
- warehousing system
- warning protection system
- warning system
- wash system
- waste material treatment system
- watchdog system
- waterjet system
- way-lubrication system
- wedge-locked tool clamping system
- wheelhead-measuring system
- windowing system
- wire-cut system
- wire-frame CAD system
- wire-guided transport system
- wire-guided trolley routing system
- word recognition system
- work infeed system
- work transfer system
- work transport system
- workhandling system
- work-holding system
- workpiece-cleaning system
- workstation-oriented CNC system
- zero error position system