crbasic

CR3000 datalogger program for Campbell open-path eddy-covariance systems, by @campbell-scientific

Gas analyzer calibration programs for CRBasic-series data loggers

Example CRBasic programs for environmental sensors

Data acquisition for spring 2018 wheat pile dust emissions scoping study

This repository contains the CRBasic code to run heat-pulse sap flow sensors on a Campbell Scientific CR1000 datalogger. It records both heat-ratio-method and maximum-heat-ratio-method sap flow data. It also contains an R script for processing these data.

Campbell Scientific CSBASIC Basic Event Based Email

Source code and docs for Urbanova Air Quality Reference Site in Spokane, WA

This repository contains several CRBasic scripts for teaching people how to code Campbell Scientific CR1000 dataloggers using the CRBasic coding language.

Adaptation of the REACCHPNA eddyflux logger program for a vineyard in southeast Washington.

Local weather station to support N2O flux trailer

Simple teaching exercise involving CR1000 datalogger, CSAT3B ultrasonic anemometer and 034B vane-prop anemometer.

CRBasic program for logging single ATI sonic anemometer

Custom support software for the CR300 and a specific setup with radiometers at Marambio antarctic base

This repository contains CRBasic code for testing ZN12-T-2WP point dendrometers with a Campbell Scientific Measurement and Control Datalogger (CR1000).

Repository for my work with a Campbell Scientific CR6 data logger in CRBasic for UART communication with a TFmini Plus LiDAR

Source and docs for met tower at Asotin landfill, Lewiston-Clarkston Valley Formaldehyde Study (2016-2017)

Scripts to perform event-based sampling using an ISCO autosampler. Water levels are monitored via a Milone Technologies eTape and a Campbell Scientific datalogger is used to record water levels and trigger sampling.

Source code for REACCH PNA eddy covariance CO2 flux towers

CR1000 datalogger program to log various soil sensors and feed data to DAQFactory