bme680

Custom STM32 in-car telemetry display: G-meter, GPS speed and cabin weather on a 2.8" TFT, with each drive logged to SD.

ESP32-S3 plant/air monitor → MQTT → InfluxDB → Grafana

Sprint Boot WebService wrapper around a BME680 Climate Sensor running on a Raspberry Pi

Dual-band Wi-Fi + BLE survey tool for the Guition NM-CYD-C5 (ESP32-C5): LVGL UI, GPS mapping, SD logging, alert engine.

Code for reading various sensors attached to a Arduino ESP32, data is uploaded via WiFi to an InfluxDB or displayed.

Wifi & BLE driven passenger flow metering with cheap ESP32 boards

ESP32 air-quality monitor: firmware, 3D-printable enclosure and wiring for BME680, CCS811 and ENS160

E-Paper Display based ultra efficient mini personal weather station

Carbon monoxide monitor using Elixir Nerves on Raspberry Pi Zero W with TGS5042 sensor and Phoenix LiveView web UI

Portable and offline environmental monitoring solution using an ESP8266 microcontroller with a built-in OLED display and a BME680 gas and environmental sensor.

Building a Clock with Environmental Sensors Using an ESP32-P4-Based HMI

KiCad port of the Adafruit BME680 breakout: temperature, humidity, pressure and gas sensor

Open-source ESP32-C3 platform for ultra-low-power environmental sensor networks powered by recycled LiPo cells. Includes KiCad PCB, PlatformIO firmware (ESP-NOW + ThingSpeak), BME280/BME680 support, deep-sleep optimizations and measured >12 months runtime on typical cells.

🛡️ Multi-sensor edge sentinel — air quality, mmWave presence, on-device audio & vision ML. Hexagonal, sim-first, hardware-ready. MQTT → Node-RED → InfluxDB → Grafana.

Código para controlar el sensor bosh bme-680 desde una raspberry usando python. Esto es un mirror de https://gitlab.com/raupulus/raspberry-sensor-bme680

ESP-IDF firmware for a CYD ESP32-2432S028 environmental sensor station (LVGL UI, telemetry)

BTHome v2 temperature and humidity sensor for Nordic nRF52840/nRF54L15, built with nRF Connect SDK/Zephyr.

Low Power WIFI weather stations and environmental data loggers based on ESP8266/ESP8285 Module

A custom-built ESP32 alarm clock featuring a LCD display with animations, air quality monitoring, and MP3 alarm sounds.

IOT-House for Raspberry Pi