Python implementation of Test Automation Controller (TAC/Alpaca) for controlling Qualcomm debug boards. It uses config files and PSOC firmware from the original TAC (Alpaca) system.

Install the pytactl command on your system from PyPI with pipx:

pipx install pytactl

To install from a checkout of this repository instead:

pipx install .

This puts a single pytactl entry point on your PATH. Note that the hid dependency needs libhidapi package to be installed (required for Bughopper V2 boards).

Alternatively, for development in a virtualenv:

virtualenv -p python3 venv
. ./venv/bin/activate
pip install -e .

Run pytactl -h to see all available options.

pytactl uses hidapi for HID-based debug boards, including Bughopper V2. Install the native HIDAPI library before installing or running pytactl.

sudo apt update
sudo apt install -y libhidapi-hidraw0 libhidapi-libusb0

sudo dnf install -y hidapi

By default, USB devices are not accessible without root. Install the udev rules file to have access to the supported boards as an user:

sudo cp 60-pytactl.rules /etc/udev/rules.d/
sudo udevadm control --reload-rules && sudo udevadm trigger

Then make sure your user is in the plugdev group (log out and back in after):

sudo usermod -aG plugdev $USER

Bughopper boards (V1 and V2) work out of the box. They are self-describing and need no config files.

All other debug boards (FTDI, PSOC, PIC32CX) are driven from a configuration file, and the configs ship with pytactl. They live in pytactl/tac_configs/, vendored from qcom-test-automation-controller and converted to the pinout format pytactl loads (see Config file format below). Nothing needs fetching before a board can be driven:

pytactl shell --serial <serial>

pytactl/tac_configs/README.md records the upstream commit the set was taken from.

--tac-config-path <dir> points pytactl at another directory of configs; without it, the bundled set is used, unless a config set has been installed with installconfigs — that one takes precedence.

To pull the current upstream configs rather than the vendored snapshot, use the installconfigs subcommand. It downloads every config file and devicelist.json from the config repository, converts them, and installs the result into a per-user data directory (resolved with platformdirs, e.g. ~/.local/share/pytactl on Linux):

pytactl installconfigs

Once that directory is populated, the board subcommands use it automatically. Override the source and destination with:

pytactl installconfigs \
  --config-repository https://github.com/qualcomm/qcom-test-automation-controller/ \
  --local-path /path/to/install \
  --ref main \
  --repository-path configurations

--ref selects the git ref (branch, tag, or commit; default HEAD) and --repository-path the directory within the repository to fetch from (default configurations).

installconfigs also copies the default FTDI Alpaca-Lite config (which has no upstream config file) in as default.pinout.json and rewrites empty configPath entries in devicelist.json to point at it.

You can also convert a configurations/ directory you already have — a checkout of qcom-test-automation-controller, say — and point pytactl at the result:

pytactl convertconfigs /path/to/qcom-test-automation-controller/configurations \
  --output /path/to/install
pytactl shell --tac-config-path /path/to/install --serial <serial>

Without --output the configs are converted in place, beside the originals. --dry-run reports what would be written without writing it, and --write-overlay also writes the UI half of each config (see below), producing the complete two-file layout rather than only the half pytactl uses.

Note: some configs in qcom-test-automation-controller currently have syntax issues; pick the ones that match your board.

Upstream stores one config file per debug board. Historically that was a single combined .tcnf file holding the hardware pinout, the automation script and the Qt UI layout (tabs, buttons, labels, tooltips, grid cells). PR #54 splits that into two sibling files, so the hardware description can be reused outside the QTAC application:

pytactl drives hardware and has no UI, so it loads the .pinout.json half and ignores the overlay. pytactl.tacconfig implements the same split (it reproduces upstream's own output for every config in that PR), which is what installconfigs and convertconfigs apply, so pytactl does not have to wait for the split to land upstream and will consume upstream's .pinout.json files unchanged once it does.

All three shapes are accepted wherever a single config file is given with --config-file-path: a .pinout.json, a split .tcnf (its pinout_ref sibling is loaded from the same directory), or a legacy combined .tcnf, which is converted in memory.

One thing does not survive the split unaided: enabled is a UI field, but several configs wire the same command name to two physical pins and disable one of them. The conversion therefore drops a disabled pin when an enabled pin claims the same command, so the command keeps driving the line it drove before.

A config's script is written in the "Alpaca" automation language: a def at column 0 and its body indented with a single tab, with no nested blocks.

def powerOn()
→   battery 1
→   delay 800
→   pkey 0

pytactl requires that tab. A statement indented with spaces — or with more than one tab — is rejected at load time with a ConfigScriptError naming the offending lines, rather than being quietly accepted: indentation is part of the config file format, and a config that does not follow it is a config to fix, not to work around.

installconfigs and convertconfigs re-indent scripts with tabs as they import them and log each file they touch, so configs that come through either command satisfy the rule and the set bundled with pytactl already does. Three upstream configs (TAC_FTDI_51, TAC_FTDI_52, TAC_FTDI_77) indent two lines each with spaces and are corrected on the way in.

This means a raw upstream .tcnf handed straight to --config-file-path may be rejected where the converted config loads. That is deliberate — convert the directory first:

pytactl convertconfigs /path/to/qcom-test-automation-controller/configurations \
  --output /path/to/install

If you are upgrading and a board that used to work now reports a ConfigScriptError, your installed config directory predates this rule: re-run pytactl installconfigs, or pytactl convertconfigs <dir> to normalise it in place.

installconfigs and convertconfigs stamp each config they write with where it came from, in a source object below the format envelope — the repository, the commit (a ref like main moves, so the SHA it resolved to at import time is what gets recorded), the directory within the repository, and the upstream file name:

{
  "$schema": "https://qualcomm.github.io/tac/schemas/pinout-1.0.json",
  "format": "tac-pinout",
  "schema_version": "1.0",
  "source": {
    "repository": "https://github.com/qualcomm/qcom-test-automation-controller.git",
    "commit": "757cc972c88e4a1098881b2bc73f3d53eac286be",
    "path": "configurations",
    "file": "TAC_FTDI_15.tcnf"
  },
  ...
}

convertconfigs reads this from the git checkout it is pointed at, and leaves an already annotated config alone, so re-converting an imported set in place does not restamp it with the wrong repository.

This is pytactl's one addition to the format: upstream's schemas/pinout-1.0.json sets "additionalProperties": false, so an annotated config does not validate against it unchanged. Pass --no-annotate to either subcommand for configs that must.

devicelist.json maps board hardware IDs to their config files, and must be present in the --tac-config-path directory for FTDI/PSOC boards. installconfigs and convertconfigs rewrite its configPath entries to the converted file names. Example entry for a PSOC board:

{
  "catalog": [
    {
      "platform_id": 17,
      "configPath": "TAC_PSOC_17.pinout.json"
    }
  ]
}

The --serial argument takes the USB serial number, not a device path. The easiest way to discover connected boards and their serial numbers is the list subcommand:

pytactl list

It prints every recognised debug board with its type, USB vendor/product ID, and serial number (read from udev, the same ID_SERIAL_SHORT value you pass to --serial):

Connected debug boards:
  Bughopper V1   vid:pid=0403:6015  serial=DP05DIAN
  PSOC           vid:pid=05c6:9302  serial=0123456789

Alternatively, find it manually with udevadm:

udevadm info /dev/ttyACM0 | grep ID_SERIAL_SHORT

Or using lsusb (replace VID:PID with 0403:6011 for FTDI or 05c6:9302 for PSOC):

lsusb -v -d VID:PID | grep iSerial

Start the interactive shell with the shell subcommand:

pytactl shell --serial <ID_SERIAL_SHORT>

Optional arguments:

--tac-config-path <dir>   # use a config directory other than the bundled one (see Configuration)
--log-level DEBUG         # log verbosity (default: DEBUG)

Once started, the shell prompt accepts commands generated from your board's config script. The available commands depend on the config — not all boards define every command (e.g. newer configs may omit powerOn/powerOff). Typical commands:

Power control:

powerOn
powerOff
devicePowerOn
devicePowerOff
usbDevicePowerOn
usbDevicePowerOff

Boot modes:

bootToEDL
bootToFastboot
bootToUEFI
reset

GPIO pins (use with 1 to assert, 0 to deassert):

pkey 1      # press power key
pkey 0      # release power key
volup 1
voldn 1

Type help in the shell to list all commands available for your specific board.

Use the oneshot subcommand to run one command and exit, without entering the interactive shell. This is handy for scripting:

pytactl oneshot bootToEDL --serial <ID_SERIAL_SHORT>
pytactl oneshot reset --serial <ID_SERIAL_SHORT>

GPIO pin commands take an integer value (1 to assert, 0 to deassert):

pytactl oneshot pkey 1 --serial <ID_SERIAL_SHORT>
pytactl oneshot pkey 0 --serial <ID_SERIAL_SHORT>

The same commands available in the shell can be used here. An unknown command exits with an error listing the commands supported by your board.

pytactl service --serial <ID_SERIAL_SHORT_1> [<ID_SERIAL_SHORT_2> ...]

The REST API runs on http://localhost:5000. Example usage with curl:

# List connected boards
curl http://localhost:5000/

# List available quick methods (bootToEDL, powerOn, etc.)
curl http://localhost:5000/<boardid>/quick

# Power on/off
curl -X PUT http://localhost:5000/<boardid>/quick/powerOn
curl -X PUT http://localhost:5000/<boardid>/quick/powerOff

# Boot to EDL
curl -X PUT http://localhost:5000/<boardid>/quick/bootToEDL

# Boot to fastboot
curl -X PUT http://localhost:5000/<boardid>/quick/bootToFastboot

# Set a named pin
curl -X PUT "http://localhost:5000/<boardid>/command/reset?value=1"

# Set a raw pin (e.g., bus A, pin 0)
curl -X PUT "http://localhost:5000/<boardid>/pin/A0?value=1"

Note: REST API server runs in debug mode. Running with multiple concurrent threads may lead to unexpected behaviour.

pytactl is licensed under the BSD-3-clause License. See LICENSE for the full license text.