This board will provide up to 512kB aditional of static RAM (fast-ram) to the sinclair QL.

The projects merges from the need of a expansion board OpenHardware & OpenSource that could adds aditional RAM memory to a stock QL. It is widely covered by other similar projects like the one that was taking as base of this one.

Regardless there are some needs not covered and that this project aim to solve (what have been achived). The most important is that other projects can be combinend by advance users with electronic skills due to soldering requirements but not for final users. Also other solutions make difficult to use in/and with other hardware developments (every address conflict may result in the must of rewiring and modifying boards to change address).

So once got the need, there was a OpenHardware project that was a very good point to start and saved a lot of time. This project is also based in the works from other people who gives a lot of time and effort to the community. All of them are referenced on the credits.

Finally, with the same spirit to give to the users another device to the community for free use, also something that would not be lost if the author cannot produce them (what is normal in a retro-tech area). Everyone could make their own board or to adquire from friends or sellers.

The only restrictions: the credits have to remain in the PCB and derivate projects.

For developments also it gives a special feature not pressent in other developments, it is that developers could play around with switches without need to solder and test them directly with their own hardware projects. Saving time and reducing the risk of damage for soldering, and continuos inserting/removing card actions.

Thanks to the use of switches it doesn't need any soldering skill at all. So final users can change it in combination with later devices (when it is possible) in an easy way. Just changing switchs setup.

Moreover also for electrical reasons the ground plane was increased, and in order to make easier the soldering process and repairing part of the components have change orientation an places.

Passtrough connector now go directly since they are not differential/balanced signals to extremes of the board. What means a reduction of the induction side effects. It also implies that the distances are shorter for signals what may result in more compatibilities attributes.

On the board you have extra information that is helpful for final users but also for developers.

Full documentation and wiki page under construction

Boards work fine in the QL used for testing

Two board can be stacked to got a maximun of 898Kb of Memory (same as Miracle's Trump Card).

Provide a expansion conector to allow conect aditional interfaces.

There area available 4 configuration trough switches in the PCB.

• 00 => 512kB - This is the standar 512kB expansion for any QL
• 01 => 256kB - This is for use as a second expansion, use the full QL space for a maximun of 898kB, be aware that this is incompatible with a lot of expansion card, so use with caution (Any expansion card that do not use jumper/switch for configuration will be incompatible).
• 10 => 192kB - Similar to 256kB provide aditional space for expansion cards correctly configured.
• 11 => 128kB - Similar to 256kB provide aditional space for expansion cards correctly configured.

For be able to use 128kB, for a total of 768kB, is mandatory to have an aditional expansion card that put ROM in address E00000h, in other case the QL ROM will hang indicating RAM malfunction, because a weired overlap of the internal 128kB with this external 128kB.

Gerbers ready to use. Labels are ready for ordering PCBs with JLCPCB but you can use your favourite maker or built it by yourself.

Click here to download the Gerber

In the GAL folder there is the source code to be compiled with GALasm that you can found here: https://github.com/daveho/GALasm

Alvaro Alea has done a version of the trump card disk interface here: https://github.com/alvaroalea/QL_MiniTrump3 , this interface do not provide memory like the original one. You can combine two of this card and the minitrump to got the same of the original trump card.

With other expansion card you could reach extra RAM. Next pictures shows the results.

Some precautions must be taken in order to prevent accidental damage in the system. The next are the most common and important recomendations.

• Do not connect it with the QL powered. Disconnect the QL Power cable before to connect it.
• Do not change the switchs position with the QL powered.
• Do not connect to a damaged QL, it may destroy de Ram Expansion board.
• Recomendation. before to combine with another expansion card, be sure they not share same address.
• Recomendation. Be aware about static danger that may result in damage of the board. Take precautions if needed.

Use it under your own risk. I take not responsability for any damage in your system. Read the information to avoid any accidental damage.

Original project of (C) 2022 Alvaro Alea Fernandez, who based his development on the work of McLeod Ideafix, Jose Leandro, Zerover and tcat among others.

Thanks to Alberto Benítez (Lince) for his support in improvements the signals.

License under: CERN Open Hardware Licence Version 2 - Strongly Reciprocal

https://ohwr.org/cern_ohl_s_v2.txt