LED Strip Controller

ESP32-C3 firmware that drives a WS2812B LED strip and is controlled remotely over MQTT.

• Nologo ESP32C3 Super Mini
• WS2812B LED strip (200 pixels), data pin on GPIO5

• Board: ESP32 Arduino -> Nologo ESP32C3 Supermini
• Settings: Hardware CDC and JTAG: Disabled, Enabled, Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS), 160MHz (WiFi), QIO, 80MHz, 921600, None, Disabled
• Port: e.g. /dev/ttyACM0

Set your Wi-Fi and MQTT broker details at the top of led-strip.ino:

const char* ssid = "";
const char* password = "";
const char* mqttServer = "";