the power of the engine

The amplifier-supply current develops a voltage across the resistor.

The paper discusses the status of mechanical properties of tungsten-base alloys as of April 1982.

As of June 23, all recovery facilities were returned to normal operations.

Cylinders three inches in diameter by three inches long...

Work is the product of force by distance.

The engineer increased the coercive force of the magnet by 7%.

A specification for (or on, or covering) nickel-chromium alloys...

The engine delivers one power stroke for each full rotation of the shaft.

For every 1000 ft increase in altitude, there is a corresponding decrease in pressure of...

A change of a few degrees may mean that icing conditions are imminent.

Five minutes were required to lift the 50-lb weight by (or through) 16 ft.

The control valve should be at least one size ( на один размер) smaller than the control-agent pipe.

In this case the proper allowance for shrinkage is 3/16 inch to the foot.

If a 10-lb block is lifted (на) 3 ft.

Loops of nucleic acids may be lengthened or diminished (на) one nucleoside at a time.

There are four covalent bonds to each carbon.

Once the function has been arrived at (or found),...

The general shape of the ray paths can be deduced from...

It would be important to identify the pathways by which...

To help you locate specific terms in the text,...

These two unknowns cannot be evaluated (or found) from the single equation.

The mass of the Earth was worked out (разг.) by another method.

The designers's goal is to arrive at a proper economic balance of investment and operating costs.

The instrument quickly locates (or localizes, or detects, or spots) lost circulation zones.

The torpedo locates its target by acoustic means.

The rocket seeks its target by acoustical homing.

Given: The engine consumes 27.5 gallons per hour...

Required: Amount of gasoline consumed.

Look up the logarithm of the number preceding the power of 10.

We deduce (or find) from Eq. (11-47) that these parameters are related to...

The combination of so many properties is difficult to achieve.

A coating of zinc is deposited on the wire to afford protection against corrosion.

The unit assures electrical system reliability.

Reliability is a difficult thing to build into equipment.

It may become necessary to reduce the amine concentrations to effect easier stripping of the amine solution.

The system is used to ensure a constant rate of flow.

The cylinder furnishes radiation shielding.

To gain the flexibility needed for...

Four-wheel steering gives exceptional manoeuvrability.

The hard metal and ceramic structures adopted make for mechanical ruggedness.

To obtain correct filter operation,...

These gases offer better performance than nitrogen.

The machines have been designed to permit of almost limitless possibilities in the field of...

The diffuser provides a uniform illumination of the negative.

The use of very large antennas will secure high efficiency in the radiation of...

The above engineering features have given these boring mills a leading position throughout the country.

To maintain high accuracy in milling operations,...

The machine provides for copying intricate masters.

Tunable dye lasers afford (or ensure) temporal resolution.

The engine delivers (or gives) enough power.

The overall goal is to realize the following characteristics:...

In most finishing operations it is only necessary to impart a smooth finish to the wheel.

The electronegativity difference between carbon and hydrogen is insufficient to produce a bond polarity high enough for effective hydrogen bonding.

Loading is direct into railroad cars.

Control of the welding current is by a trip-switch.

Transmission of power from the engine to the wheels is accomplished by the clutch.

Traction is effected by the winding action of the cables.

Routine maintenance is handled in the same way.

Conditions under which the test is run should be improved.

A program of component tests is underway.

Our internal communications are handled by a network with nervous and metabolic subsystems.

Fine control of carrier-gas pressure is achieved by...

The determination of position by dead reckoning is commonly performed by plotting on...

This reduction is most conveniently performed at the cathode.

Cross pollination of flowers is effected principally by bees.

The reaction is carried out (or conducted, or run) by the above-described mechanism.

Controls are exercised by the cell.

This substitution is realized under acidic conditions.

Conduction usually occurs through a metallic wall.

The manufacture of dyes proceeds from simple raw materials.

The compound is in considerable use as a catalyst.

In the field of organic chemistry the combustion reactions are of great utility.

Some of these solutions are commonly (or widely, or extensively) used, others are used very infrequently.

Extensive use is made of electric cables manufactured by...

Carbon steel is extensively (or heavily) used (or enjoys wide use) in...

Because of the widespread availability of ac power, ac motors are in common use.

This indicator is in general use.

Hard chrome plating is used extensively (or has found wide use) in engine repair work.

There are other abrasive materials whose use is widespread.

Ample (or Great, or Much) use is made of the laboratories at the mine.

There is wide use of Type 347 stainless steel.

Glass wool is widely used (or employed) as a filtering material.

The hack watch has a wide use in navigation.

Miniature cameras are much used (or are in wide use).

The motor mercury interruptor admits control of the rate of make and break.

For a given gross weight a reduction in engine specific weight allows a corresponding increase in payload.

This allows (or permits) zero-setting the meter.

The bottom plunger moulding press allows for loading when the mould is in the open position.

This enables (or permits, or allows) the temperature to be found at any point.

This enables an easy replacement of the drum section.

The alloying elements make it possible to co-deposit substantial quantities of tungsten.

A central focusing screw makes possible the focusing of both barrels simultaneously.

Electric-motor drives permit efficient power generation...

The right-angle milling attachment permits (of) milling in the horizontal plane.

Aircraft model testing provides (or furnishes) a means for rapidly evaluating...

A laser-anemometer enables one to make two-dimensional velocity-component measurements optically.

This arrangement has enabled tooling costs to be reduced.

A multi-bender arrangement permits making a sequence of different-angle bends.

A modification of the square-jaw clutch permits more convenient engagement.

The first step lets us describe the dependence of...

These curves allow one (or us, etc.) to write...

This increases the rate of hydrolysis in proportion to the concentration of...

The density decreases as ()пропорционально^1/2.

The force of... varies directly with the first power of distance.

For oils of greater viscosity at atmospheric temperatures, the distances should be reduced in proportion.

The voltage will vary proportionally (or in proportion) to...

If dy/dx varies proportionally with ,...

The duties vary proportionately with the speed of the main engine.

The explosion tends to make heavier nuclei out of lighter ones.

Further weathering may turn goethite to hematite.

The paste is formed into a thin film by compressing it between...

This DNA polymerase converts the single-stranded DNA into a duplex molecule.

Collapse of a mass of sediment causes it to become a turbid liquid.

We render this equation exact by multiplication by (x, y) = xy.

Alchemists believed that lead could be turned to gold.

One pound of water requires about 970 Btu to change (or convert) it to steam.

The propeller accelerates the air passing through it, thereby changing (or transforming) engine power into useful thrust.

To convert heat to (or into) electricity,...

The amplifier converts direct current to alternating current.

The machine can be converted into a projection welder.

A microprocessor can be made into a general-purpose microcomputer.

Motion is imparted by means of a double-acting hydraulic ram.

Spindle drive is taken from a 3-hp motor.

The converter is actuated by electro-hydraulic means.

The machine is driven by a diesel engine.

The aircraft is powered by two engines.

The worktable is set in motion and the roughing cut taken.

The discriminators are operated from a regulated power supply.