@@ -44,13 +44,19 @@ Hip05 Example (note that Hip06 is the same except compatible):
 	};
 
 HiSilicon Hip06/Hip07 PCIe host bridge DT (almost-ECAM) description.
+
+Some BIOSes place the host controller in a mode where it is ECAM
+compliant for all devices other than the root complex. In such cases,
+the host controller should be described as below.
+
 The properties and their meanings are identical to those described in
 host-generic-pci.txt except as listed below.
 
 Properties of the host controller node that differ from
 host-generic-pci.txt:
 
-- compatible     : Must be "hisilicon,pcie-almost-ecam"
+- compatible     : Must be "hisilicon,hip06-pcie-ecam", or
+		   "hisilicon,hip07-pcie-ecam"
 
 - reg            : Two entries: First the ECAM configuration space for any
 		   other bus underneath the root bus. Second, the base
@@ -59,7 +65,7 @@ host-generic-pci.txt:
 
 Example:
 	pcie0: pcie@a0090000 {
-		compatible = "hisilicon,pcie-almost-ecam";
+		compatible = "hisilicon,hip06-pcie-ecam";
 		reg = <0 0xb0000000 0 0x2000000>,  /*  ECAM configuration space */
 		      <0 0xa0090000 0 0x10000>; /* host bridge registers */
 		bus-range = <0  31>;
 
@@ -2585,12 +2585,26 @@ F:	include/uapi/linux/if_bonding.h
 
 BPF (Safe dynamic programs and tools)
 M:	Alexei Starovoitov <ast@kernel.org>
+M:	Daniel Borkmann <daniel@iogearbox.net>
 L:	netdev@vger.kernel.org
 L:	linux-kernel@vger.kernel.org
 S:	Supported
+F:	arch/x86/net/bpf_jit*
+F:	Documentation/networking/filter.txt
+F:	include/linux/bpf*
+F:	include/linux/filter.h
+F:	include/uapi/linux/bpf*
+F:	include/uapi/linux/filter.h
 F:	kernel/bpf/
-F:	tools/testing/selftests/bpf/
+F:	kernel/trace/bpf_trace.c
 F:	lib/test_bpf.c
+F:	net/bpf/
+F:	net/core/filter.c
+F:	net/sched/act_bpf.c
+F:	net/sched/cls_bpf.c
+F:	samples/bpf/
+F:	tools/net/bpf*
+F:	tools/testing/selftests/bpf/
 
 BROADCOM B44 10/100 ETHERNET DRIVER
 M:	Michael Chan <michael.chan@broadcom.com>
@@ -8761,6 +8775,7 @@ W:	http://www.linuxfoundation.org/en/Net
 Q:	http://patchwork.ozlabs.org/project/netdev/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next.git
+B:	mailto:netdev@vger.kernel.org
 S:	Maintained
 F:	net/
 F:	include/net/
@@ -12464,7 +12479,6 @@ F:	drivers/clk/ti/
 F:	include/linux/clk/ti.h
 
 TI ETHERNET SWITCH DRIVER (CPSW)
-M:	Mugunthan V N <mugunthanvnm@ti.com>
 R:	Grygorii Strashko <grygorii.strashko@ti.com>
 L:	linux-omap@vger.kernel.org
 L:	netdev@vger.kernel.org
 
@@ -1,7 +1,7 @@
 VERSION = 4
 PATCHLEVEL = 11
 SUBLEVEL = 0
-EXTRAVERSION = -rc6
+EXTRAVERSION = -rc8
 NAME = Fearless Coyote
 
 # *DOCUMENTATION*
 
@@ -406,6 +406,14 @@ config ARC_HAS_DIV_REM
 	bool "Insn: div, divu, rem, remu"
 	default y
 
+config ARC_HAS_ACCL_REGS
+	bool "Reg Pair ACCL:ACCH (FPU and/or MPY > 6)"
+	default n
+	help
+	  Depending on the configuration, CPU can contain accumulator reg-pair
+	  (also referred to as r58:r59). These can also be used by gcc as GPR so
+	  kernel needs to save/restore per process
+
 endif	# ISA_ARCV2
 
 endmenu   # "ARC CPU Configuration"
 
@@ -17,10 +17,11 @@
 #include <asm/barrier.h>
 #include <asm/smp.h>
 
+#define ATOMIC_INIT(i)	{ (i) }
+
 #ifndef CONFIG_ARC_PLAT_EZNPS
 
 #define atomic_read(v)  READ_ONCE((v)->counter)
-#define ATOMIC_INIT(i)	{ (i) }
 
 #ifdef CONFIG_ARC_HAS_LLSC
 
 
@@ -16,6 +16,11 @@
 	;
 	; Now manually save: r12, sp, fp, gp, r25
 
+#ifdef CONFIG_ARC_HAS_ACCL_REGS
+	PUSH	r59
+	PUSH	r58
+#endif
+
 	PUSH	r30
 	PUSH	r12
 
@@ -75,6 +80,11 @@
 	POP	r12
 	POP	r30
 
+#ifdef CONFIG_ARC_HAS_ACCL_REGS
+	POP	r58
+	POP	r59
+#endif
+
 .endm
 
 /*------------------------------------------------------------------------*/
 
@@ -86,6 +86,10 @@ struct pt_regs {
 
 	unsigned long r12, r30;
 
+#ifdef CONFIG_ARC_HAS_ACCL_REGS
+	unsigned long r58, r59;	/* ACCL/ACCH used by FPU / DSP MPY */
+#endif
+
 	/*------- Below list auto saved by h/w -----------*/
 	unsigned long r0, r1, r2, r3, r4, r5, r6, r7, r8, r9, r10, r11;
 
 
@@ -319,7 +319,8 @@ static char *arc_extn_mumbojumbo(int cpu_id, char *buf, int len)
 static void arc_chk_core_config(void)
 {
 	struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()];
-	int fpu_enabled;
+	int saved = 0, present = 0;
+	char *opt_nm = NULL;;
 
 	if (!cpu->extn.timer0)
 		panic("Timer0 is not present!\n");
@@ -346,17 +347,28 @@ static void arc_chk_core_config(void)
 
 	/*
 	 * FP hardware/software config sanity
-	 * -If hardware contains DPFP, kernel needs to save/restore FPU state
+	 * -If hardware present, kernel needs to save/restore FPU state
 	 * -If not, it will crash trying to save/restore the non-existant regs
-	 *
-	 * (only DPDP checked since SP has no arch visible regs)
 	 */
-	fpu_enabled = IS_ENABLED(CONFIG_ARC_FPU_SAVE_RESTORE);
 
-	if (cpu->extn.fpu_dp && !fpu_enabled)
-		pr_warn("CONFIG_ARC_FPU_SAVE_RESTORE needed for working apps\n");
-	else if (!cpu->extn.fpu_dp && fpu_enabled)
-		panic("FPU non-existent, disable CONFIG_ARC_FPU_SAVE_RESTORE\n");
+	if (is_isa_arcompact()) {
+		opt_nm = "CONFIG_ARC_FPU_SAVE_RESTORE";
+		saved = IS_ENABLED(CONFIG_ARC_FPU_SAVE_RESTORE);
+
+		/* only DPDP checked since SP has no arch visible regs */
+		present = cpu->extn.fpu_dp;
+	} else {
+		opt_nm = "CONFIG_ARC_HAS_ACCL_REGS";
+		saved = IS_ENABLED(CONFIG_ARC_HAS_ACCL_REGS);
+
+		/* Accumulator Low:High pair (r58:59) present if DSP MPY or FPU */
+		present = cpu->extn_mpy.dsp | cpu->extn.fpu_sp | cpu->extn.fpu_dp;
+	}
+
+	if (present && !saved)
+		pr_warn("Enable %s for working apps\n", opt_nm);
+	else if (!present && saved)
+		panic("Disable %s, hardware NOT present\n", opt_nm);
 }
 
 /*
 
@@ -371,6 +371,8 @@
 
 	phy1: ethernet-phy@1 {
 		reg = <7>;
+		eee-broken-100tx;
+		eee-broken-1000t;
 	};
 };
 
 
@@ -672,6 +672,7 @@
 	ti,non-removable;
 	bus-width = <4>;
 	cap-power-off-card;
+	keep-power-in-suspend;
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc2_pins>;