Repository navigation
[aw] [aw] Failure Investigator (6h) exceeded daily AI credits budget #66699
Description
Activity
Agent job 37733358315 failed.
Warning
Daily Workflow AIC Guardrail Exceeded: The agent was not started because the 24-hour guardrail total reached the configured AI Credits threshold.
- 24h AIC guardrail total:
10.9KAI Credits - Recorded AIC:
854AI Credits - Estimated AIC (unresolved accounting):
10KAI Credits - Configured threshold:
10KAI Credits
Estimated credits represent conservative per-run maximums where accounting is unavailable, not confirmed consumption. Subsequent scans retry unresolved accounting and replace estimates if recorded usage becomes available. Otherwise, these estimates stop counting when the affected runs leave the rolling 24-hour window.
Recorded AIC values are approximate; estimates are not measured consumption. Consult the billing dashboards for accurate usage and charges.
How to raise the daily limit
Set
max-daily-ai-creditsin your workflow frontmatter to a higher value, then recompile:max-daily-ai-credits: 20K
Common suffix shorthands:
K= thousands,M= millions (e.g.2M= 2,000,000).After editing the workflow source file, regenerate the compiled lock file:
gh aw compile
Commit and push the updated
.lock.ymlfile.[!NOTE]
Raising the limit increases the number of AI inference calls the workflow can make
per 24-hour window. Review your Copilot or model provider billing
before significantly increasing the threshold (for example, before doubling the current
value or setting it far above expected usage).What is the daily AI Credits guardrail?
The
max-daily-ai-creditsfrontmatter option sets a per-workflow spending cap measured in AI Credits across the 24-hour window before the current run. The cap is scoped to the repository and workflow — it aggregates usage across all runs of this workflow regardless of who triggered them.When the total of recorded AI Credits and unresolved conservative estimates across all completed runs of this workflow in the last 24 hours reaches the threshold, the activation job sets the
daily_ai_credits_exceededoutput totrueand the agent job is skipped for that run. The conclusion job still runs and creates this report.The guardrail is evaluated at activation time, not retrospectively, so a single very large run that pushes usage over the threshold only blocks subsequent runs in the same window — it does not cancel a run that is already in progress.
How to disable this guardrail
[!CAUTION]
Disabling this guardrail removes the per-workflow spending cap. Only disable it if you have
an alternative mechanism for controlling AI cost usage or if the workflow is intentionally
uncapped.Set
max-daily-ai-credits: -1in the workflow frontmatter to explicitly disable the guardrail, then recompile:max-daily-ai-credits: -1
gh aw compile
Alternatively, remove the
max-daily-ai-creditskey entirely to fall back to the enterprise-wide default (if one is configured) or to run with no per-workflow cap.Generated from [aw] Failure Investigator (6h) · ◷
- 24h AIC guardrail total:
Agent job 37735756351 failed.
Warning
Daily Workflow AIC Guardrail Exceeded: The agent was not started because the 24-hour guardrail total reached the configured AI Credits threshold.
- 24h AIC guardrail total:
10.8KAI Credits - Recorded AIC:
814AI Credits - Estimated AIC (unresolved accounting):
10KAI Credits - Configured threshold:
10KAI Credits
Estimated credits represent conservative per-run maximums where accounting is unavailable, not confirmed consumption. Subsequent scans retry unresolved accounting and replace estimates if recorded usage becomes available. Otherwise, these estimates stop counting when the affected runs leave the rolling 24-hour window.
Recorded AIC values are approximate; estimates are not measured consumption. Consult the billing dashboards for accurate usage and charges.
How to raise the daily limit
Set
max-daily-ai-creditsin your workflow frontmatter to a higher value, then recompile:max-daily-ai-credits: 20K
Common suffix shorthands:
K= thousands,M= millions (e.g.2M= 2,000,000).After editing the workflow source file, regenerate the compiled lock file:
gh aw compile
Commit and push the updated
.lock.ymlfile.[!NOTE]
Raising the limit increases the number of AI inference calls the workflow can make
per 24-hour window. Review your Copilot or model provider billing
before significantly increasing the threshold (for example, before doubling the current
value or setting it far above expected usage).What is the daily AI Credits guardrail?
The
max-daily-ai-creditsfrontmatter option sets a per-workflow spending cap measured in AI Credits across the 24-hour window before the current run. The cap is scoped to the repository and workflow — it aggregates usage across all runs of this workflow regardless of who triggered them.When the total of recorded AI Credits and unresolved conservative estimates across all completed runs of this workflow in the last 24 hours reaches the threshold, the activation job sets the
daily_ai_credits_exceededoutput totrueand the agent job is skipped for that run. The conclusion job still runs and creates this report.The guardrail is evaluated at activation time, not retrospectively, so a single very large run that pushes usage over the threshold only blocks subsequent runs in the same window — it does not cancel a run that is already in progress.
How to disable this guardrail
[!CAUTION]
Disabling this guardrail removes the per-workflow spending cap. Only disable it if you have
an alternative mechanism for controlling AI cost usage or if the workflow is intentionally
uncapped.Set
max-daily-ai-credits: -1in the workflow frontmatter to explicitly disable the guardrail, then recompile:max-daily-ai-credits: -1
gh aw compile
Alternatively, remove the
max-daily-ai-creditskey entirely to fall back to the enterprise-wide default (if one is configured) or to run with no per-workflow cap.Generated from [aw] Failure Investigator (6h) · ◷
- 24h AIC guardrail total:
Agent job 37740306184 failed.
Warning
Daily Workflow AIC Guardrail Exceeded: The agent was not started because the 24-hour guardrail total reached the configured AI Credits threshold.
- 24h AIC guardrail total:
10.8KAI Credits - Recorded AIC:
774AI Credits - Estimated AIC (unresolved accounting):
10KAI Credits - Configured threshold:
10KAI Credits
Estimated credits represent conservative per-run maximums where accounting is unavailable, not confirmed consumption. Subsequent scans retry unresolved accounting and replace estimates if recorded usage becomes available. Otherwise, these estimates stop counting when the affected runs leave the rolling 24-hour window.
Recorded AIC values are approximate; estimates are not measured consumption. Consult the billing dashboards for accurate usage and charges.
How to raise the daily limit
Set
max-daily-ai-creditsin your workflow frontmatter to a higher value, then recompile:max-daily-ai-credits: 20K
Common suffix shorthands:
K= thousands,M= millions (e.g.2M= 2,000,000).After editing the workflow source file, regenerate the compiled lock file:
gh aw compile
Commit and push the updated
.lock.ymlfile.[!NOTE]
Raising the limit increases the number of AI inference calls the workflow can make
per 24-hour window. Review your Copilot or model provider billing
before significantly increasing the threshold (for example, before doubling the current
value or setting it far above expected usage).What is the daily AI Credits guardrail?
The
max-daily-ai-creditsfrontmatter option sets a per-workflow spending cap measured in AI Credits across the 24-hour window before the current run. The cap is scoped to the repository and workflow — it aggregates usage across all runs of this workflow regardless of who triggered them.When the total of recorded AI Credits and unresolved conservative estimates across all completed runs of this workflow in the last 24 hours reaches the threshold, the activation job sets the
daily_ai_credits_exceededoutput totrueand the agent job is skipped for that run. The conclusion job still runs and creates this report.The guardrail is evaluated at activation time, not retrospectively, so a single very large run that pushes usage over the threshold only blocks subsequent runs in the same window — it does not cancel a run that is already in progress.
How to disable this guardrail
[!CAUTION]
Disabling this guardrail removes the per-workflow spending cap. Only disable it if you have
an alternative mechanism for controlling AI cost usage or if the workflow is intentionally
uncapped.Set
max-daily-ai-credits: -1in the workflow frontmatter to explicitly disable the guardrail, then recompile:max-daily-ai-credits: -1
gh aw compile
Alternatively, remove the
max-daily-ai-creditskey entirely to fall back to the enterprise-wide default (if one is configured) or to run with no per-workflow cap.Generated from [aw] Failure Investigator (6h) · ◷
- 24h AIC guardrail total:
Agent job 37743054918 failed.
Warning
Daily Workflow AIC Guardrail Exceeded: The agent was not started because the 24-hour guardrail total reached the configured AI Credits threshold.
- 24h AIC guardrail total:
10.7KAI Credits - Recorded AIC:
735AI Credits - Estimated AIC (unresolved accounting):
10KAI Credits - Configured threshold:
10KAI Credits
Estimated credits represent conservative per-run maximums where accounting is unavailable, not confirmed consumption. Subsequent scans retry unresolved accounting and replace estimates if recorded usage becomes available. Otherwise, these estimates stop counting when the affected runs leave the rolling 24-hour window.
Recorded AIC values are approximate; estimates are not measured consumption. Consult the billing dashboards for accurate usage and charges.
How to raise the daily limit
Set
max-daily-ai-creditsin your workflow frontmatter to a higher value, then recompile:max-daily-ai-credits: 20K
Common suffix shorthands:
K= thousands,M= millions (e.g.2M= 2,000,000).After editing the workflow source file, regenerate the compiled lock file:
gh aw compile
Commit and push the updated
.lock.ymlfile.[!NOTE]
Raising the limit increases the number of AI inference calls the workflow can make
per 24-hour window. Review your Copilot or model provider billing
before significantly increasing the threshold (for example, before doubling the current
value or setting it far above expected usage).What is the daily AI Credits guardrail?
The
max-daily-ai-creditsfrontmatter option sets a per-workflow spending cap measured in AI Credits across the 24-hour window before the current run. The cap is scoped to the repository and workflow — it aggregates usage across all runs of this workflow regardless of who triggered them.When the total of recorded AI Credits and unresolved conservative estimates across all completed runs of this workflow in the last 24 hours reaches the threshold, the activation job sets the
daily_ai_credits_exceededoutput totrueand the agent job is skipped for that run. The conclusion job still runs and creates this report.The guardrail is evaluated at activation time, not retrospectively, so a single very large run that pushes usage over the threshold only blocks subsequent runs in the same window — it does not cancel a run that is already in progress.
How to disable this guardrail
[!CAUTION]
Disabling this guardrail removes the per-workflow spending cap. Only disable it if you have
an alternative mechanism for controlling AI cost usage or if the workflow is intentionally
uncapped.Set
max-daily-ai-credits: -1in the workflow frontmatter to explicitly disable the guardrail, then recompile:max-daily-ai-credits: -1
gh aw compile
Alternatively, remove the
max-daily-ai-creditskey entirely to fall back to the enterprise-wide default (if one is configured) or to run with no per-workflow cap.Generated from [aw] Failure Investigator (6h) · ◷
- 24h AIC guardrail total:
Agent job 37745558478 failed.
Warning
Daily Workflow AIC Guardrail Exceeded: The agent was not started because the 24-hour guardrail total reached the configured AI Credits threshold.
- 24h AIC guardrail total:
10.7KAI Credits - Recorded AIC:
693AI Credits - Estimated AIC (unresolved accounting):
10KAI Credits - Configured threshold:
10KAI Credits
Estimated credits represent conservative per-run maximums where accounting is unavailable, not confirmed consumption. Subsequent scans retry unresolved accounting and replace estimates if recorded usage becomes available. Otherwise, these estimates stop counting when the affected runs leave the rolling 24-hour window.
Recorded AIC values are approximate; estimates are not measured consumption. Consult the billing dashboards for accurate usage and charges.
How to raise the daily limit
Set
max-daily-ai-creditsin your workflow frontmatter to a higher value, then recompile:max-daily-ai-credits: 20K
Common suffix shorthands:
K= thousands,M= millions (e.g.2M= 2,000,000).After editing the workflow source file, regenerate the compiled lock file:
gh aw compile
Commit and push the updated
.lock.ymlfile.[!NOTE]
Raising the limit increases the number of AI inference calls the workflow can make
per 24-hour window. Review your Copilot or model provider billing
before significantly increasing the threshold (for example, before doubling the current
value or setting it far above expected usage).What is the daily AI Credits guardrail?
The
max-daily-ai-creditsfrontmatter option sets a per-workflow spending cap measured in AI Credits across the 24-hour window before the current run. The cap is scoped to the repository and workflow — it aggregates usage across all runs of this workflow regardless of who triggered them.When the total of recorded AI Credits and unresolved conservative estimates across all completed runs of this workflow in the last 24 hours reaches the threshold, the activation job sets the
daily_ai_credits_exceededoutput totrueand the agent job is skipped for that run. The conclusion job still runs and creates this report.The guardrail is evaluated at activation time, not retrospectively, so a single very large run that pushes usage over the threshold only blocks subsequent runs in the same window — it does not cancel a run that is already in progress.
How to disable this guardrail
[!CAUTION]
Disabling this guardrail removes the per-workflow spending cap. Only disable it if you have
an alternative mechanism for controlling AI cost usage or if the workflow is intentionally
uncapped.Set
max-daily-ai-credits: -1in the workflow frontmatter to explicitly disable the guardrail, then recompile:max-daily-ai-credits: -1
gh aw compile
Alternatively, remove the
max-daily-ai-creditskey entirely to fall back to the enterprise-wide default (if one is configured) or to run with no per-workflow cap.Generated from [aw] Failure Investigator (6h) · ◷
- 24h AIC guardrail total:
Agent job 37747649768 failed.
Warning
Daily Workflow AIC Guardrail Exceeded: The agent was not started because the 24-hour guardrail total reached the configured AI Credits threshold.
- 24h AIC guardrail total:
10.6KAI Credits - Recorded AIC:
648AI Credits - Estimated AIC (unresolved accounting):
10KAI Credits - Configured threshold:
10KAI Credits
Estimated credits represent conservative per-run maximums where accounting is unavailable, not confirmed consumption. Subsequent scans retry unresolved accounting and replace estimates if recorded usage becomes available. Otherwise, these estimates stop counting when the affected runs leave the rolling 24-hour window.
Recorded AIC values are approximate; estimates are not measured consumption. Consult the billing dashboards for accurate usage and charges.
How to raise the daily limit
Set
max-daily-ai-creditsin your workflow frontmatter to a higher value, then recompile:max-daily-ai-credits: 20K
Common suffix shorthands:
K= thousands,M= millions (e.g.2M= 2,000,000).After editing the workflow source file, regenerate the compiled lock file:
gh aw compile
Commit and push the updated
.lock.ymlfile.[!NOTE]
Raising the limit increases the number of AI inference calls the workflow can make
per 24-hour window. Review your Copilot or model provider billing
before significantly increasing the threshold (for example, before doubling the current
value or setting it far above expected usage).What is the daily AI Credits guardrail?
The
max-daily-ai-creditsfrontmatter option sets a per-workflow spending cap measured in AI Credits across the 24-hour window before the current run. The cap is scoped to the repository and workflow — it aggregates usage across all runs of this workflow regardless of who triggered them.When the total of recorded AI Credits and unresolved conservative estimates across all completed runs of this workflow in the last 24 hours reaches the threshold, the activation job sets the
daily_ai_credits_exceededoutput totrueand the agent job is skipped for that run. The conclusion job still runs and creates this report.The guardrail is evaluated at activation time, not retrospectively, so a single very large run that pushes usage over the threshold only blocks subsequent runs in the same window — it does not cancel a run that is already in progress.
How to disable this guardrail
[!CAUTION]
Disabling this guardrail removes the per-workflow spending cap. Only disable it if you have
an alternative mechanism for controlling AI cost usage or if the workflow is intentionally
uncapped.Set
max-daily-ai-credits: -1in the workflow frontmatter to explicitly disable the guardrail, then recompile:max-daily-ai-credits: -1
gh aw compile
Alternatively, remove the
max-daily-ai-creditskey entirely to fall back to the enterprise-wide default (if one is configured) or to run with no per-workflow cap.Generated from [aw] Failure Investigator (6h) · ◷
- 24h AIC guardrail total:
Agent job 37752021539 failed.
Warning
Daily Workflow AIC Guardrail Exceeded: The agent was not started because the 24-hour guardrail total reached the configured AI Credits threshold.
- 24h AIC guardrail total:
10.6KAI Credits - Recorded AIC:
625AI Credits - Estimated AIC (unresolved accounting):
10KAI Credits - Configured threshold:
10KAI Credits
Estimated credits represent conservative per-run maximums where accounting is unavailable, not confirmed consumption. Subsequent scans retry unresolved accounting and replace estimates if recorded usage becomes available. Otherwise, these estimates stop counting when the affected runs leave the rolling 24-hour window.
Recorded AIC values are approximate; estimates are not measured consumption. Consult the billing dashboards for accurate usage and charges.
How to raise the daily limit
Set
max-daily-ai-creditsin your workflow frontmatter to a higher value, then recompile:max-daily-ai-credits: 20K
Common suffix shorthands:
K= thousands,M= millions (e.g.2M= 2,000,000).After editing the workflow source file, regenerate the compiled lock file:
gh aw compile
Commit and push the updated
.lock.ymlfile.[!NOTE]
Raising the limit increases the number of AI inference calls the workflow can make
per 24-hour window. Review your Copilot or model provider billing
before significantly increasing the threshold (for example, before doubling the current
value or setting it far above expected usage).What is the daily AI Credits guardrail?
The
max-daily-ai-creditsfrontmatter option sets a per-workflow spending cap measured in AI Credits across the 24-hour window before the current run. The cap is scoped to the repository and workflow — it aggregates usage across all runs of this workflow regardless of who triggered them.When the total of recorded AI Credits and unresolved conservative estimates across all completed runs of this workflow in the last 24 hours reaches the threshold, the activation job sets the
daily_ai_credits_exceededoutput totrueand the agent job is skipped for that run. The conclusion job still runs and creates this report.The guardrail is evaluated at activation time, not retrospectively, so a single very large run that pushes usage over the threshold only blocks subsequent runs in the same window — it does not cancel a run that is already in progress.
How to disable this guardrail
[!CAUTION]
Disabling this guardrail removes the per-workflow spending cap. Only disable it if you have
an alternative mechanism for controlling AI cost usage or if the workflow is intentionally
uncapped.Set
max-daily-ai-credits: -1in the workflow frontmatter to explicitly disable the guardrail, then recompile:max-daily-ai-credits: -1
gh aw compile
Alternatively, remove the
max-daily-ai-creditskey entirely to fall back to the enterprise-wide default (if one is configured) or to run with no per-workflow cap.Generated from [aw] Failure Investigator (6h) · ◷
- 24h AIC guardrail total:
Agent job 37754348568 failed.
Warning
Daily Workflow AIC Guardrail Exceeded: The agent was not started because the 24-hour guardrail total reached the configured AI Credits threshold.
- 24h AIC guardrail total:
10.6KAI Credits - Recorded AIC:
585AI Credits - Estimated AIC (unresolved accounting):
10KAI Credits - Configured threshold:
10KAI Credits
Estimated credits represent conservative per-run maximums where accounting is unavailable, not confirmed consumption. Subsequent scans retry unresolved accounting and replace estimates if recorded usage becomes available. Otherwise, these estimates stop counting when the affected runs leave the rolling 24-hour window.
Recorded AIC values are approximate; estimates are not measured consumption. Consult the billing dashboards for accurate usage and charges.
How to raise the daily limit
Set
max-daily-ai-creditsin your workflow frontmatter to a higher value, then recompile:max-daily-ai-credits: 20K
Common suffix shorthands:
K= thousands,M= millions (e.g.2M= 2,000,000).After editing the workflow source file, regenerate the compiled lock file:
gh aw compile
Commit and push the updated
.lock.ymlfile.[!NOTE]
Raising the limit increases the number of AI inference calls the workflow can make
per 24-hour window. Review your Copilot or model provider billing
before significantly increasing the threshold (for example, before doubling the current
value or setting it far above expected usage).What is the daily AI Credits guardrail?
The
max-daily-ai-creditsfrontmatter option sets a per-workflow spending cap measured in AI Credits across the 24-hour window before the current run. The cap is scoped to the repository and workflow — it aggregates usage across all runs of this workflow regardless of who triggered them.When the total of recorded AI Credits and unresolved conservative estimates across all completed runs of this workflow in the last 24 hours reaches the threshold, the activation job sets the
daily_ai_credits_exceededoutput totrueand the agent job is skipped for that run. The conclusion job still runs and creates this report.The guardrail is evaluated at activation time, not retrospectively, so a single very large run that pushes usage over the threshold only blocks subsequent runs in the same window — it does not cancel a run that is already in progress.
How to disable this guardrail
[!CAUTION]
Disabling this guardrail removes the per-workflow spending cap. Only disable it if you have
an alternative mechanism for controlling AI cost usage or if the workflow is intentionally
uncapped.Set
max-daily-ai-credits: -1in the workflow frontmatter to explicitly disable the guardrail, then recompile:max-daily-ai-credits: -1
gh aw compile
Alternatively, remove the
max-daily-ai-creditskey entirely to fall back to the enterprise-wide default (if one is configured) or to run with no per-workflow cap.Generated from [aw] Failure Investigator (6h) · ◷
- 24h AIC guardrail total:
Agent job 37758301251 failed.
Warning
Daily Workflow AIC Guardrail Exceeded: The agent was not started because the 24-hour guardrail total reached the configured AI Credits threshold.
- 24h AIC guardrail total:
10.5KAI Credits - Recorded AIC:
546AI Credits - Estimated AIC (unresolved accounting):
10KAI Credits - Configured threshold:
10KAI Credits
Estimated credits represent conservative per-run maximums where accounting is unavailable, not confirmed consumption. Subsequent scans retry unresolved accounting and replace estimates if recorded usage becomes available. Otherwise, these estimates stop counting when the affected runs leave the rolling 24-hour window.
Recorded AIC values are approximate; estimates are not measured consumption. Consult the billing dashboards for accurate usage and charges.
How to raise the daily limit
Set
max-daily-ai-creditsin your workflow frontmatter to a higher value, then recompile:max-daily-ai-credits: 20K
Common suffix shorthands:
K= thousands,M= millions (e.g.2M= 2,000,000).After editing the workflow source file, regenerate the compiled lock file:
gh aw compile
Commit and push the updated
.lock.ymlfile.[!NOTE]
Raising the limit increases the number of AI inference calls the workflow can make
per 24-hour window. Review your Copilot or model provider billing
before significantly increasing the threshold (for example, before doubling the current
value or setting it far above expected usage).What is the daily AI Credits guardrail?
The
max-daily-ai-creditsfrontmatter option sets a per-workflow spending cap measured in AI Credits across the 24-hour window before the current run. The cap is scoped to the repository and workflow — it aggregates usage across all runs of this workflow regardless of who triggered them.When the total of recorded AI Credits and unresolved conservative estimates across all completed runs of this workflow in the last 24 hours reaches the threshold, the activation job sets the
daily_ai_credits_exceededoutput totrueand the agent job is skipped for that run. The conclusion job still runs and creates this report.The guardrail is evaluated at activation time, not retrospectively, so a single very large run that pushes usage over the threshold only blocks subsequent runs in the same window — it does not cancel a run that is already in progress.
How to disable this guardrail
[!CAUTION]
Disabling this guardrail removes the per-workflow spending cap. Only disable it if you have
an alternative mechanism for controlling AI cost usage or if the workflow is intentionally
uncapped.Set
max-daily-ai-credits: -1in the workflow frontmatter to explicitly disable the guardrail, then recompile:max-daily-ai-credits: -1
gh aw compile
Alternatively, remove the
max-daily-ai-creditskey entirely to fall back to the enterprise-wide default (if one is configured) or to run with no per-workflow cap.Generated from [aw] Failure Investigator (6h) · ◷
- 24h AIC guardrail total:
This issue was automatically closed because it expired on 2026-10-08T10:39:06.345Z.
Closed by Workflow
Workflow Failure
Workflow: [aw] Failure Investigator (6h)
Branch: main
Run: https://github.com/github/gh-aw/actions/runs/37697192984
Warning
Daily Workflow AIC Guardrail Exceeded: The agent was not started because the 24-hour guardrail total reached the configured AI Credits threshold.
10.4KAI Credits1.4KAI Credits9KAI Credits10KAI CreditsEstimated credits represent conservative per-run maximums where accounting is unavailable, not confirmed consumption. Subsequent scans retry unresolved accounting and replace estimates if recorded usage becomes available. Otherwise, these estimates stop counting when the affected runs leave the rolling 24-hour window.
Recorded AIC values are approximate; estimates are not measured consumption. Consult the billing dashboards for accurate usage and charges.
How to raise the daily limit
Set
max-daily-ai-creditsin your workflow frontmatter to a higher value, then recompile:Common suffix shorthands:
K= thousands,M= millions (e.g.2M= 2,000,000).After editing the workflow source file, regenerate the compiled lock file:
Commit and push the updated
.lock.ymlfile.What is the daily AI Credits guardrail?
The
max-daily-ai-creditsfrontmatter option sets a per-workflow spending cap measured in AI Credits across the 24-hour window before the current run. The cap is scoped to the repository and workflow — it aggregates usage across all runs of this workflow regardless of who triggered them.When the total of recorded AI Credits and unresolved conservative estimates across all completed runs of this workflow in the last 24 hours reaches the threshold, the activation job sets the
daily_ai_credits_exceededoutput totrueand the agent job is skipped for that run. The conclusion job still runs and creates this report.The guardrail is evaluated at activation time, not retrospectively, so a single very large run that pushes usage over the threshold only blocks subsequent runs in the same window — it does not cancel a run that is already in progress.
How to disable this guardrail
Set
max-daily-ai-credits: -1in the workflow frontmatter to explicitly disable the guardrail, then recompile:Alternatively, remove the
max-daily-ai-creditskey entirely to fall back to the enterprise-wide default (if one is configured) or to run with no per-workflow cap.Action Required
Assign this issue to an agent to debug and fix the issue.
Optimize token consumption
This failure was triggered by a guardrail limit (max-daily-ai-credits). Use this prompt with any coding agent (GitHub Copilot, Claude, Gemini, etc.) to analyze token usage and reduce costs:
Debug with any coding agent
Use this prompt with any coding agent (GitHub Copilot, Claude, Gemini, etc.):
Manually invoke the agent
Debug this workflow failure using your favorite Agent CLI and the
agentic-workflowsprompt.agentic-workflowsskill from.github/skills/agentic-workflows/SKILL.mdor https://github.com/github/gh-aw/blob/main/.github/skills/agentic-workflows/SKILL.mddebug the agentic workflow aw-failure-investigator failure in https://github.com/github/gh-aw/actions/runs/37697192984Tip
Stop reporting this workflow as a failure
To stop a workflow from creating failure issues, set
report-failure-as-issue: falsein its frontmatter: