How to add raw data from "Simple Receiving" example to RMIR (Remote Master) #1326

On an Arduino Lolin WeMos D1 R2, I have successfully installed library, run example "Simple Receiver" and collected raw data:
"Number 0"
Protocol=NEC Address=0x4, Command=0x10, Raw-Data=0xEF10FB04, 32 bits, LSB first, Gap=3276750us, Duration=67850us
Send with: IrSender.sendNEC(0x4, 0x10, );
Protocol=NEC Address=0x4, Command=0x10, Repeat, Gap=39750us, Duration=11900us

I want to use this process to map all buttons and than somehow make it usable to add to RMIR (Remote Master), so I could upload after to a programmable Atlas 1056B03 remote.

Looking for any suggestion, what to do with received Raw-Data ?